Magic TV 3300D problem

3個月前買了3300D,駁了一個2T harddisk (裸族個類,以前在3100D 用)。試過幾次突然唔見咗個harddisk (其中2次我親眼見电視上突然show 已成功移除USB harddisk), 之後要boot 机顶盒或power off/on harddisk 才恢復,是否已知的bug ? 已update latest firmware 及 用另外一個唔同牌子external box and 2T harddisk 也未能改善。

有乜高見?

This 3300D use NTFS

TOP

3個月前買了3300D,駁了一個2T harddisk (裸族個類,以前在3100D 用)。試過幾次突然唔見咗個harddisk (其中 ...
thunderlite 發表於 2014-11-17 16:32


2014-11-17_170322.jpg
2014-11-17 17:03

TOP

Thanks. These instructions appeared in the manual since 3100D or even 3000. Actually, the harddisk is working so there is no connect or disconnect activity manually done by me at that moment. I am using 3.5 harddisk with external power supply, I have even replace the bundled power supply with a HKD200 one from SSP. I have tried different speed of harddisk (5400 rpm and 7200 rpm) and box (usb 2.0 and 3.0).

One of the reason I bought 3300D is because of the support of NTFS, so I really want to have  it running in NTFS stable.

BTW, I have many bad experience in ext2 on 3100D previously that suddenly it was corrupted and cannot be repaired. If NTFS is not recommended, will ext3 be better ?

wkile, any recommendation ?

TOP

我接水牛牌3T-USB3.0
好穩定,完全冇問題

TOP

Is it my 3300D problem ? Currently I have to insert another 64G USB finger into the 3300D as a backup recording device in case the main HD suddenly disappeared.

TOP

kofz hing, which file system you are using ?

TOP

建議最好送部機去代理檢查下是否有問題

TOP

回覆 4# thunderlite

Please try:
- the other USB port in the Magic TV
- another USB cable
- another 3.5" USB HDD or docking

TOP

kofz hing, which file system you are using ?
thunderlite 發表於 2014-11-17 17:33


   原廠買返已經係 NTFS

直插Magic TV冇format已經錄到

完全冇問題,好穩定,未試過錄唔到

TOP