Magic TV Firmware 11.0 beta

本帖最後由 wklie 於 2016-12-7 12:09 編輯

Firmware 11.0beta
Firmware date: 2016-12-6

New IPTV channel.

MTV3300D / 3800D / 8000D:
http://www.magictv.com/hk/downlo ... 0_8000_11_0beta.zip

MTV3200D / 3700D / 7000D:
http://www.magictv.com/hk/downlo ... 0_7000_11_0beta.zip

MTV1000:
http://www.magictv.com/hk/downloads/mtv1000_11_0beta.zip


Firmware 10.11
Firmware date: 2016-11-21

Compared to 10.10 beta2 (or 5.11 of old models), this firmware adds the ability to scan EPG of other channels using the second tuner, when not recording and not standing by.  EPG of all channels should show up in roughly 15 minutes for the current broadcast channels.

For single-tuner models, Magic TV will scan EPG of all channels when standing by, if standby mode is set to Fast Start Up (default, setting is available on newer models only).

MTV3300D / 3800D / 8000D:
http://www.magictv.com/hk/downloads/mtv3300_3800_8000_10_11.zip

MTV3200D / 3700D / 7000D:
http://www.magictv.com/hk/downloads/mtv3200_3700_7000_10_11.zip

MTV1000:
http://www.magictv.com/hk/downloads/mtv1000_10_11.zip



The following models are no longer supported.  No new feature can be added.  Users are highly recommended to trade them in for current models.  If you experience any serious problem with this firmware, please downgrade to the official firmware on Magic TV web page.

This update contains bug fixes, and Magic TV will scan EPG of all channels when standing by, if standby mode is set to Fast Start Up (default, setting is available on newer models only).

Firmware date: 2016-11-22

MTV3000 / MTV3100(D) / MTV3500 / MTV3600D:
http://www.magictv.com/hk/downlo ... _3600_6_12beta2.zip

MTV5000(D):
http://www.magictv.com/hk/downloads/mtv5000_6_12beta2.zip

回覆 1# wklie


    Thanks for update.

TOP

多謝樓主分享

TOP

"scan EPG of other channels using the second tuner" 功能有啲多餘, 因為此功能 對使用"省電" & "全機關閉" 待機才有用, 因為用"快速起動", 當待機時已經識自動scan EPG了。而用"省電"待機似乎問題多多之前已有多人反映(包括我), 迫不得以 只好用"快速起動"。
你地唔去解決"省電" 待機 的有關問題, 而去攪埋啲無關痛癢嘅野

TOP

另外, 我發覺 10.10 beta5 & 10.10 beta6, 當使用"快速起動"待機時, HDMI 仍然有輸出, 只係黑屏罷了, 但 10.8 係冇此問題, 待機時 HDMI 冇輸出

TOP

本帖最後由 wklie 於 2016-10-28 11:14 編輯
"scan EPG of other channels using the second tuner" 功能有啲多餘, 因為此功能 對使用"省電" & "全機關閉" 待機才有用, 因為用"快速起動", 當待機時已經識自動scan EPG了
kccl 發表於 2016-10-27 22:13


It is beneficial to people who don't use Fast Startup or run it 24x7 or just after a power cycle.  From time to time there are users who complain having no EPG for RTHK.

TOP

另外, 我發覺 10.10 beta5 & 10.10 beta6, 當使用"快速起動"待機時, HDMI 仍然有輸出, 只係黑屏罷了, 但 10 ...
kccl 發表於 2016-10-27 22:19


How do you determine there's still HDMI output?  What's the model of your TV (or AV amp)?

TOP

How do you determine there's still HDMI output?  What's the model of your TV (or AV amp)?
wklie 發表於 2016-10-28 08:52



    偶然有次冇開MTV情況下着咗部電視, 見到佢顯示 "1080P/50", 如果冇signal係冇野顯示的

TOP

本帖最後由 kccl 於 2016-10-28 11:34 編輯

我有個疑問, 我部電視係Panasonic, 肯定係單tuner, 開着電視後冇耐, 在冇轉台情況下可以顯示晒所有台的EPG, 你地就要借助second tuner 先做到, 咁Panasonic 係點做到?

TOP

It is beneficial to people who don't use Fast Startup or run it 24x7 or just after a power cycle.  ...
wklie 發表於 2016-10-28 08:51



    除咗你係行 7x24 外, 乜仲會有好多人行 7x24 咩

TOP