Netvigator Router + Giga switch setup

Netvigator router -> HP Pro Curve -> computers

I am using the above setup. While BT, I can browse internet on the same computer but can't browse internet on other computers. Is this a setting problem? Or is it a hardware problem? Should I add a DIR655 behind the netvigator router?

做咩大家見到係英文就唔裡架

TOP

回復 2# vq_renesis
netvigator架router!
D師兄都嚇傻左!

TOP

第一次聽人講個部係"Router"
但亦有好多人將BN個部講成"Modem"

Pxxw個部係modem, 你加隻switch係唔得既, 要加部router先得~
你想用655 ??
加左655就唔洗加個switch啦~
因為655係行giga的...
唔夠port又唔同講法!

TOP

回復 2# vq_renesis

更係啦 , 都睇唔明 .

TOP

回復 1# vq_renesis

When did u get a router from Netvigator?
Never heard of it!!!

That device is a modem but not router. So u have to buy a router to share the network.

TOP

PCCW has a modem with WiFi function ( 4 LAN port on the back side of your modem) but I think it is not a NAT router.

TOP

OKOK, 我以為netvigator果個係modem+router添
我其實已經有655但係唔夠port同聽d好多師兄講加個giga switch會快d
咁係唔係應該加左就會沒問題??
Netvigator modem -> DIR 655 -> HP Pro Curve -> Computers

TOP

哎呀
依家又要煩點樣port forward
試左成晚都唔得
search過應該係655問題, 點算??

TOP

回復 9# vq_renesis

Router Enable UPNP and If Software have UPNP, enable it.

or

Manually set up Port Forward in Router per service

TOP