MikroTik RouterOS 5.7 Release ~ 09/15/2011

What's new in 5.7 (2011-Sep-14 10:54):

*) ovpn client - fixed crash when user name or password together were longer than 11 symbols;
*) sstp client - added an option to skip server address verification from certificate;
*) fixed problem - router crashed sometimes when using USB modem;
*) userman - show overall totals, show user totals if user has more than one entry;
*) lcd - retrieving '/system lcd page' configuration did not work with hundreds of interfaces;
*) webfig - added ability to reorder fields in skins;
*) webfig - added ability to add/remove new tabs & separators in skins;
*) webfig - added ability to add any field to special status page;
*) webfig - fixed problem when user sometimes got logged out with message "internal server error";
*) webfig - logout didn't log user out from router;
*) webfig - added System/Password for changing user's own password;
*) system reset-configuration - if keep-users is specified ssh user keys are preserved as well;
*) ipsec - new exchange mode (main-l2tp) for l2tp tunnel users to allow
    FQDN as a peer ID with preshared key authorization in main mode;
*) ssh - fix possible server crash when connection is interrupted;
*) improved ipv4 forwarding performance on all boards with simple configuration by up to 30%;
*) add passthrough setting to change-dscp, change-ttl, change-mss,
    strip-ipv4-options, change-hop-limit mangle targets;
*) ipsec - fixed problem of RB1200 rebooting when large amount of UDP traffic is sent through IPsec;
*) sniffer - added more useful packet filtering options, also available as quick mode command parameters;


Download:
http://www.mikrotik.com/download.html

Just updated. Thanks a lot.

TOP

me too..thanks

TOP

My upgraded too.
But found the "dhcp" usage very high in "/ tools profile".

TOP

My upgraded too.
But found the "dhcp" usage very high in "/ tools profile".
VR2VDT 發表於 2011-9-16 01:38

Fixed.
Re-enable the "switch-all-ports" to yes in /interface ethernet switch
Don't know why the same setting in 5.6 has no problem, but cause high CPU usage in 5.7

TOP

What's new in 5.7 (2011-Sep-14 10:54):

*) ovpn client - fixed crash when user name or password toge ...
idolclub 發表於 2011-9-15 22:53

真係可以快成30%?

TOP

upgraded

TOP

本帖最後由 ipohk 於 2011-9-16 21:58 編輯

after upgraded  cpu usage keep 100%,
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

after upgraded  cpu usage keep 100%,
ipohk 發表於 2011-9-16 21:55

turn "switch-all-ports" to yes, then reboot the router.
The CPU usage would go down.

TOP

回復 5# VR2VDT

hi ching ,

can you post the screen? where exactly the option?

thx

TOP

相關文章