如何可以在intranet中使用 domain name 登入 nas (有圖)?

用緊 xp,係 web browser 度想用domain name(applied from no-ip)登入部 nas,吾使用 ip address。以前得架播,而家吾得!
thx.

你個 Dynamic DNS 有無指返去您個 IP Address ?
如有 Router  , 有無 set Port Forward.?

TOP

你rounter 做左port forward未?

TOP

另一個可能性就係router唔support 呢個功能。你最近係未換左router?

TOP

另一個可能性就係router唔support 呢個功能。你最近係未換左router?
wcychris 發表於 2012-5-24 14:12


x2
buffalo router唔支援

TOP

答返樓上幾位師兄d問題先:
> 你個 Dynamic DNS 有無指返去您個 IP Address ?  >>> 呢個吾係好明?

> 你router 做左port forward未? >>> 已經forward 左 80 to 192.168.8.246

>係router唔support 呢個功能 >>> 以前用 asus router,而家用緊tplink 1043nd (dd-wrt) router

TOP

答返樓上幾位師兄d問題先:
> 你個 Dynamic DNS 有無指返去您個 IP Address ?  >>> 呢個吾係好明?

> 你ro ...
yoyo1512 發表於 2012-5-24 15:56


dd-wrt預設係唔支援NAT loopback, 所以連唔到係正常

TOP

dd-wrt預設係唔支援NAT loopback, 所以連唔到係正常
KinChungE 發表於 2012-5-24 16:04



原來如此。thx.

TOP

If you are using DD-WRT, to enable loopback, Save the following commands to the Firewall Script on the Administration->Commands page to fix loopback.
============================
insmod ipt_mark
insmod xt_mark
iptables -t mangle -A PREROUTING -i ! `get_wanface` -d `nvram get wan_ipaddr` -j MARK --set-mark 0xd001
iptables -t nat -A POSTROUTING -m mark --mark 0xd001 -j MASQUERADE
============================

TOP

If you are using DD-WRT, to enable loopback, Save the following commands to the Firewall Script on t ...
nchiu 發表於 2012-5-24 16:20



works like a charm!!!
thank you!!!

TOP