Router連switch問題

我岩岩買左個新router(Tp-link 1043nd), 然後張舊果個router(dlink dir-600)當做Switch
以下係我個駁法

HKBN CABLE ==> TPLINK WAN PORT
TPLINK LAN PORT==>DLINK LAN PORT
DLINK LAN PORT ==> PC

已經將DLINK 的dhcpserver同wifi功能關閉
DLINK set左做192.168.0.1 TPLINK set 左做 192.168.1.1

做過speedtest,一開始個speed 係去到9Xmbps
但係唔知點解到左第2日就得翻9mbps
我試過張hkbn cable直插PC, 係可以去到9Xmbps, 但係一連過DLINK 就得翻9mbps

求師兄幫忙

回復 1# csunny95

Try to put a factory restore on your switch and reconfigure
Also did you disable NAT on your switch?

TOP

dlink應該要set 192.168.1.x

TOP