2隻都可以行GE既router駁埋之後係咪行唔到GE架呢?

FYAKMK

各位師兄,小弟住村屋G/F & 1/F 用緊2隻GE既ROUTER, 一隻係CISCO 既E4200, 另一隻係ASUS 既 RT56U, 我而家既駁法係用隻RT56U 做MAIN ROUTER, 放地下, 另一1隻E4200 放喺1/F,中間用條CAT 6 CABLE　串埋，　但係仍我喺隻RT56U 個 LAN PORT 位睇返只係著橙燈, 即係唔係行緊GE,想問下師兄係咪要咩特別SETTING 先可以行到GE?定咁樣既駁法係行唔到GE架呢?如果係硬件問題,係咪轉用同牌子既ROUTER就會用到?

金比

http://dlcdnet.asus.com/pub/ASUS ... _Manual_English.pdf
Page 6,
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
Yellow LED
: 1000Mbps connection.
Green LED
: 10Mbps/100Mbps connection

應該係行緊1000

FYAKMK

Page 6,
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
Yello ...
金比 發表於 2014-6-17 15:47

唔該師兄先,我諗我應該搞錯左啲顏色,應該係著綠燈先啱,因為我隻RT56U 之後有隻NAS喺度,而我肯定隻NAS係行緊GE,隻E4200個PORT 同NAS 個PORT係唔同顏色既燈既

sonichkhk

會不會是跳線問題?

FYAKMK

回覆 4# sonichkhk

Thx Ching, 應該唔會，我用tester check 過，8條線都啱位既

50144

Are you connecting it to the WAN port of the E4200?? Maybe the WAN port only supports 100Mbps??

FYAKMK

回覆 6# 50144


       Ching , my connection is from RT56u LAN 1 to E4200 LAN 1, so I think the problem is not from wan port thx .

sonichkhk

回覆  sonichkhk

Thx Ching, 應該唔會，我用tester check 過，8條線都啱位既
FYAKMK 發表於 2014-6-17 19:34

我是指會不會是Automatic MDI/MDI-X問題

skipskip

樓主介唔介意講吓兩頭RJ45 d 線點排?

FYAKMK

回覆 8# sonichkhk


    Ching,呢個我唔知係咩黎，可否告知小弟點樣去check呢樣野？