Totolink A2004NS 做 repeater 唔 work

有冇師兄用得到, 救教學~~

以我所知,冇港人成功過

TOP

本帖最後由 echen 於 2014-6-30 01:12 編輯

it work easy using multi bridge mode

1.  setup the a2004ns lan ip same subnet but different ip as main wifi router (my main router WDR7500 is 192.168.22.1) so I set the ip of 2004ns as 192.168.22.2



2.  connect the a2004ns and use wifi multi bridge setup (2.4 or 5G) and connected to your main router



3.  set the a2004ns with DHCP server off



4.  reboot the router then both lan and wifi of your a2004ns working ok, now using lan pc to reply this post and picture using iPad wifi connecting a2004ns to login.  a2004ns using 5g bridge to WDR7500, so a2004ns is repeater and clients now.



附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

And set both wdr7500 and a2004ns wifi to be same ssid, same password, same channel, same format etc.

TOP

唔該各位, 我今晚返去試下.

TOP

本帖最後由 volospin 於 2014-6-30 15:30 編輯
And set both wdr7500 and a2004ns wifi to be same ssid, same password, same channel, same format etc.
hidetoshi 發表於 2014-6-30 11:01


I would suggest setting different channel for each router as they would interfere each other.
Best if you can setup channels choice from 1, 6, 11.
I would use Android apps Wifi Analyzer to find out what channel at what location is best.

And best if you can use wire or homeplug connecting each other.

Also please turn off firewall on the secondary router.

TOP

有冇師兄用得到, 救教學~~
waijoe 發表於 2014-6-29 23:34



wds 唔work , wireless bridge 就 work.

TOP

TOP