[操作疑難] Linksys E2500 刷左DD-WRT無法從和記Modem獲取IP

Linksys E2500 刷左DD-WRT無法從和記Modem獲取IP,
和記Modem型號係DTL DT-W460,  
電腦直插DTL DT-W460 Modem可獲取IP及上網,
用TP-Link Router直插DTL DT-W460 Modem也可獲取IP及上網,
何解E2500無法獲取IP?
E2500已set 自動設定-DHCP
希望各位師兄能幫幫忙



TOP

剛剛試了TP-Link Router插Lan連Modem, E2500再插Lan連TP-Link Router是可以上網的, TP-Link成日hand機所以先平平地換E2500 DDWRT版

TOP

本帖最後由 tomleehk 於 2014-7-12 13:32 編輯

1) Before and after you flashed DD-WRT, did you perform 30/30/30 reset ?
2) Some DD-WRT version (even the latest version) may have certain bug in certain feature, you can try out some other less updated versions until you find a satisfactory and fully functioning version..
3) E2500 is equipped with BCM5357 as CPU and 8MB flash, you can flash EKO version DD-WRT which can be found at
Other downloads / Others / V24-K26
I am using dd-wrt.v24-16773_NEWD-2_K2.6_mega-nv60k.bin for my E2000 (found at the branch svn16773) and everything works fine for WAN DHCP, LAN DHCP, DDNS, Wireless, OpenVPN etc. The other newer versions all having certain bug in certain feature.

Remark : The supported firmware for your model should comprise words "NEWD-2", "K2.6" and "nv60k" in file name.

TOP

1) Before and after you flashed DD-WRT, did you perform 30/30/30 reset ?
2) Some DD-WRT version (eve ...
tomleehk 發表於 2014-7-12 11:26



唔該師兄先
聽日試下30/30/30 reset
如果都唔得我會選擇刷翻官方
因為我買時鋪頭幫我刷好DD-WRT
請問刷翻官方係咪一樣軟件升級就得?

TOP

唔該師兄先
聽日試下30/30/30 reset
如果都唔得我會選擇刷翻官方
因為我買時鋪頭幫我刷好DD-WRT
請問刷 ...
zo1d5032 發表於 2014-7-12 23:32



http://dd-wrt.com/wiki/index.php ... g_to_stock_firmware
Reverting to stock firmware
It has been asked about: "how do i revert back to stock firmware?" and the answer is download the stock firmware image from the manufacturer's website, reset the router back to defaults using a 30-30-30 hard reset, then flash the stock image from within the dd-wrt webgui. After 5 minutes it should finish, you will then need to do another 30-30-30 reset and then access the stock webgui @ 192.168.1.1

TOP