求助:e1200 flash完tomato後就只入唔返。

用Mac check IP 就show 168.254.x.x

係咪已經brick了?

本帖最後由 tomleehk 於 2014-11-17 19:11 編輯

1) After power on, did the power LED keep on flashing without stop ?
2) What was the firmware filename you used to flash to your E1200 ?

TOP

1) yes
2) need to check, left in office

TOP

本帖最後由 tomleehk 於 2014-11-17 22:01 編輯

1) Power off router and connect LAN cable to any LAN port of router.

2) Configure the local network adapter on the laptop to a Static IP of 192.168.1.25, Netmask 255.255.255.0, and Default Gateway of 192.168.1.1.

3) From a command prompt, type ping -t 192.168.1.1  , hit <ENTER>  (which will show the laptop attempting to repeatedly ping the bricked router)

4) Then plug the router to power on and see if there is any response at the command windows within first 15 seconds...

TOP

TOP

typo

169.254.x.x

2) tomato-K26-1.28.9054MIPSR2-beta-Std


thanks for your research, I will study after finishing office work

btw, if fail, can I send back to repair?

TOP

本帖最後由 tomleehk 於 2014-11-18 12:40 編輯

Q1>  btw, if fail, can I send back to repair?
A1>  I am afraid you have to ask the 代理 and see if the cost is really worth..

This looks like dd-wrt (as well as its forum) was down by noon today..

TOP

Q1>  btw, if fail, can I send back to repair?
A1>  I am afraid you have to ask the 代理 and see if t ...
tomleehk 發表於 2014-11-18 12:34



    bcoz it is under warranty

TOP

本帖最後由 tomleehk 於 2014-11-18 12:45 編輯
bcoz it is under warranty
病態賭徒 發表於 2014-11-18 12:40


Under warranty ..

Don't open the case ...

Send to 代理 and see if they use their own way to fix it or replace a new one for you..

However,  don't mention what you have done as what you have done manually is definitely beyond warranty coverage..

TOP

let see see if I can fix.....

thanks million tomleehk

TOP