R6300V用PCCW 300M 只得10Mbps都唔夠

用緊PCCW 光纖300M
電腦MB係Asus H97-PRO Gamer
router用R6300v2原廠firmware
電腦經router出speedtest result係得咁
但係電腦直插modem就有咁多
係未一定要刷merlin firmware先可以食盡定還是我有setting未set好呀?

試下disable QoS/Traffic Meter.



TOP

試左disable都係唔得

TOP

試左disable都係唔得
keung622 發表於 2015-9-16 23:54



奇怪,我以前個部買返黎咩都冇搞過插LAN都食得盡個速.

modem接router條線係咪用返跟router條cat5e?

如果D線冇問題,試埋up firmware都唔得就似係部機問題.

TOP

本帖最後由 wklie 於 2015-9-17 00:19 編輯

回覆 3# keung622

Go to Advanced -> Internet Port -> Show Statistics and capture the screen and post here.

Observe that the Status of both WAN and the LAN port of PC should show 1000M/full, not 100, not 10.  (I guess either of the ports dropped to 10Mbps due to very poor network cable)

Also try factory reset.

TOP

試下開硬件nat

TOP

回覆  keung622

Go to Advanced -> Internet Port -> Show Statistics and capture the screen and post  ...
wklie 發表於 2015-9-17 00:17


the wan show that is 10M first, when i use the same cable plug into another port it show 100M/full.
My cable is cat6 cable. Is it the modem problem or ISP?

TOP

試下開硬件nat
wildcat2005 發表於 2015-9-17 00:21


點樣開嫁?

TOP

回覆 8# keung622


  modem接router條線係咪行足8芯CAT5,有無用埋NOW TV?老電MODEM直出得LAN1同LAN2係WORK,LAN1或2出左個比NETWORK,另外一個就會FOR做返NOW TV傳輸,得10M

TOP

回覆 8# keung622


  modem接router條線係咪行足8芯CAT5,有無用埋NOW TV?老電MODEM直出得LAN1同LAN2係WORK,LAN1或2出左個比NETWORK,另外一個就會FOR做返NOW TV傳輸,得10M,
搵下 Eth Port Information有得睇

TOP