Cisco EA6500 using DD-WRT

有冇師兄知道點做??

我上網做research, 應該要更新去舊dd wrt firmware, 再update去最新, 但係就唔太明白

http://www.dd-wrt.com/phpBB2/vie ... r=asc&start=630

唔該師兄幫幫手

本帖最後由 solexkey 於 2016-1-29 09:44 編輯

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=162802&start=61
Booyah! I downgraded stock firmware to 1.1.28.146856 and now it takes the dd wrt firmware. Dunno if it was the newer stock firmware of something funky with my browser! Wahoo finally dd wrt action!!!!!


我估你唔太明白嘅嘢喺 :
要downgrade 去舊嘅 factory firmware, 再 flash DD-WRT..

有D 新version嘅 factory firmware 喺有機制去拒絕flash third party firmware, 所以需要降級到D 舊嘅version(沒有這種機制), 你先可以flash dd-wrt.

或者你引用番原文,先可以了解你唔明D乜嘢..

TOP

回覆 2# solexkey


呢到講緊 有d人 flash 完 dd-wrt 會boot 去原裝firmware, "robiebab" post 咗兩個file 出來, 叫人, "recommend using 1 version earlier of ddwrt in combination with the firmware i posted a few days ago"

但係條zippyshare link又死咗

    http://www.dd-wrt.com/phpBB2/vie ... r=asc&start=630

TOP

本帖最後由 solexkey 於 2016-1-29 15:48 編輯
回覆  solexkey


呢到講緊 有d人 flash 完 dd-wrt 會boot 去原裝firmware, "robiebab" post 咗兩個file  ...

"recommend using 1 version earlier of ddwrt in combination with the firmware i posted a few days ago"

hiatus 發表於 2016-1-29 13:18


喺啦,講緊呢樣嘢..

有D 新version嘅 factory firmware 喺有機制去拒絕flash third party firmware,flash 完會出現番原裝firmware ,所以需要降級到D 舊嘅version(沒有這種機制)嘅 factory firmware, 你先可以flash dd-wrt.

我估佢寫錯咗,應該喺 "recommend using 1 version earlier of factory firmware in combination with the firmware i posted a few days ago"

TOP