To access the USB device from a Windows computer:
Use any of these methods to access the USB device:
•Select Start > Run. Enter \\readyshare in the dialog box and click OK.
•Open a browser and enter \\readyshare in the address bar.
•Open My Network Places and enter \\readyshare in the address bar.
To map the USB device to a Windows network drive:
1. Connect your USB storage device to the USB port on the router.
If your USB device uses a power supply, you must use it when you connect the USB
device to the router.
When you connect the USB device to the router’s USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB drive is available to all
computers on your local area network (LAN).
2. Select Start > Run.
3. Enter \\readyshare in the dialog box.
4. Click the OK button.
A screen automatically opens and displays the USB Storage device.
5. Right-click the USB storage device and select Map network drive