[操作疑難] CISCO WRT160V3 刷OPENWRT 問題

請教各位
有部ROUTER 想刷OPENWRT
睇左OPENWRT既DOC, 話可以直接用WEB UPLOAD, 但要先ENABLE BACKFIRE KENREL
it appears that just enabling it in backfire kernel don't make this router to work.

https://wiki.openwrt.org/toh/linksys/wrt160n

請問點樣先可以ENABLE,  請指教, THANKS

建議先刷dd-wrt,再用dd-wrt的firmware upgrade頁面刷openwrt。
dd-wrt有linksys management mode用的image,安裝方法在此

TOP

回覆 2# ckshum

成功刷到OPENWRT了, 謝謝CHING, THANKS

TOP