RouterOS X86 回廠設定

請教師兄們,部routerOS 用winbox 入吾到,話user name and password 吾啱!但我之前無set 過需要用password 入的,只是用admin 進入,吾通比人hack過????另一方面我問賣家話要重裝系統,做回廠設定話吾得????!這個真的嗎?

請教師兄們,部routerOS 用winbox 入吾到,話user name and password 吾啱!但我之前無set 過需要用passwor ...
國大代表 發表於 2016-11-17 11:29


淘的ros 盤,有唔少係預設開哂所有既登入方法,包括wan外登入(唔係壞事,方便最初整野計)
新機裝起第1時間改pw ~acc名

之後Ip > service  度關左唔用個d佢
或者firewall rule 自己調整下
或者set番佢允去邊個range既ip用邊個服務連入等
https://www.ez2o.com/Blog/Post/MikroTik-RouterOS-Disable-Service


http://wiki.mikrotik.com/wiki/Manual:Reset

Note: RouterOS password can only be reset by reinstalling the router, or using the reset button (or jumper hole) in case the hardware is RouterBOARD. For X86 devices, only complete reinstall will clear the password, along with other configuration. For RouterBOARD devices, several methods exist, depending on our model.


http://wiki.mikrotik.com/wiki/Manual:Netinstall

NetInstall is a program that runs on Windows computer that allows you to install, reinstall or reset MikroTiK RouterOS onto a PC or onto a RouterBOARD via an Ethernet cable.

TOP