magic pro底板如何入bios

公司有塊magic pro底板--965--(n年前)
吾知點解開機時看不到bios(畫面)
入到windows才出現畫面
按del/f2等有無反應
吾知有無師兄知點解..???

CLEAR bios都唔得?

TOP

先用VGA cable作為video output, 再用一隻PS/2頭嘅keyboard入BIOS.

TOP

回復 2# kabhei

未試過....

TOP

回復 3# Kyo-Mok

其實mouse/keyboard都系ps/2頭

TOP

回復 5# edberg28


    咁塊板應該會收到來自隻keyboard嘅input.
既然boot到OS, 即係部機過到POST, bios冇問題. 先試用VGA output, 唔得的話換張graphic card再試

TOP

回復 6# Kyo-Mok

好的....謝謝你...因為有用張舊版夾張舊Matrox RT.X 100 (RT.X100)卡

現在系用緊內置vga..我想可能用外置displaycard試一下

TOP

回復 7# edberg28


    應該唔關卡事~
3-1 Entering Setup
Power on the computer and by pressing <Del> immediately allows you to enter Setup.
If the message disappears before your respond and you still wish to enter Setup, restart the
system to try again by turning it OFF then ON or pressing the “RESET” button on the system
case. You may also restart by simultaneously pressing <Ctrl>, <Alt> and <Delete> keys.
If you do not press the keys at the correct time and the system does not boot, an error message
will be displayed and you will again be asked to
Press <F1> to continue, <Ctrl-Alt-Esc> or <Del> to enter Setup

TOP

回復 8# cchhll

thanks.........

TOP