硬碟問題

今日本來想升級塊底版
所以想係新底版從新安裝OS
型號: M5A88-M

問題在我已經在BIOS設定好了再用好幾個方法都卡在黑色畫面...左上角有條底線係咁閃...

方法一
1.CD-ROM 2.HDD
但都卡在黑色畫面...左上角有條底線係咁閃...

方法2
1.USB 2.HDD
LOAD唔到USB之於都而係卡係黑色畫面...左上角有條底線係咁閃...

方法3
換不到品牌硬碟....有一D品牌OK...一D都係黑色畫面...左上角有條底線係咁閃...

最後
用一個已安裝OS既硬碟開機......好開心地成功進入OS
但係呢隻硬碟太舊了想用新硬碟....

唔明點解塊底版認唔到USB..CD-ROM...同某一些品牌硬碟....
有冇師兄知度係唔係整身塊M5A88-M有相容性問題>>
定係我BIOS設定錯誤.....譎教教我各位師兄....

PS:用已安裝OS既硬碟開機...硬碟管理果度都會見到話卡住係黑畫面LOAD唔到果D HDD....

本帖最後由 q_p 於 2014-9-22 04:11 編輯

are you sure that u have set boot priority to CD/USB over harddisk in BIOS?
what is the working old harddisk OS and partition type?
are the unrecognised HDDs empty / no system partition(有無裝過OS) / of GPT partition?

TOP

are you sure that u have set boot priority to CD/USB over harddisk in BIOS?
what is the working old  ...
q_p 發表於 2014-9-22 03:56



    1.有
    2.window 2012 r2 in old hdd 250G
    3.我唔係好明英文唔係咁好....不過我已經專登FORMAT左先再放落去都係唔得...

TOP

can;t think of anything right now, i;ll come back to you later..

TOP

本帖最後由 q_p 於 2014-9-22 05:21 編輯

According to Asus M5A88-M User Manual - Page 63:
Untitled 1.png
2014-9-22 05:00

"If you use a SATA optical drive to run the OS installation disk, we strongly recommend that you install the optical dirve to the SATA connectors 5/6 and set them to [IDE] mode."

Shut down PC, connect CD Drive to the right port.
Reset BIOS (load default settings)
Follow the remaining recommendation by setting to IDE mode.
Change boot priority.
Save settings & reboot.

TOP

多謝師兄幫助...
我睇左師兄呢個教學加設定多少少野就成功安裝到OS了...

TOP

you are welcome
八卦問下而家快板賣幾錢?

TOP

you are welcome
八卦問下而家快板賣幾錢?
q_p 發表於 2014-9-22 19:27



    朋友送的...

TOP

Also if you install Windows OS from USB drive, do not plug your USB drive in USB 3.0 port.

TOP

Also if you install Windows OS from USB drive, do not plug your USB drive in USB 3.0 port.
What 發表於 2014-9-25 04:31



    i use USB 2.0 ...but cant boot os install mode

TOP

相關文章