舊PC 裝 window 問題 - Win8.1

mobo : GA-EP43-DS3L
CPU : E8400
RAM : 8G
SSD : OCZ vertex2 60G
HDD : samsung SATA2 500G
Display : GT630

用黎裝 Win8.1

BIOS set ACHI mode ENABLED, 完全沒法裝機..............用
1) internal DVD ROM read install disc
2) ext USB drive
3) ext DVD ROM

連boot 入去 "select languages, select area ..." 入唔到
hang 左係藍底白色logo ....


BIOS set ACHI mode DISABLED + 用jumper clear CMOS
load optimized settings
用internal DVD ROM 裝到, 完成基本設定, 未裝driver

重新開機, 昨天試過重開機是OK.......................
今日開機會出error, 入唔番start screen or desktop

" file:\windows\system32\ntoskml.exe error code :0xc0000021"
按F8, 入去D選項 : F1 - F9, 試過晒都唔可以, start 番個window

出error 有時會係
" file:\windows\system32\boot\winload.exe   error code :0xc0000098"

之前部機都用緊原配置, 行win7 utlimate  都無問題
用 ACHI mode, format 果D HDD, SSD就裝唔到,

有無ching 可以指教下解決方法

thanks

What is your BIOS version ?

TOP

F9C ..................

thanks

TOP

bios 試下改為只 boot ssd,第2第3都唔好set

TOP

bios 試下改為只 boot ssd,第2第3都唔好set
199hehehaha 發表於 2014-10-7 19:00



    試了.......................NG

TOP

No F9c BIOS found in Gigabyte website , and F9e is a beta BIOS only .You better flash back to F8 . Where you found the F9c version ?

TOP

試ram

TOP

If you install win7 or win8 without using AHCI mode then NCQ is also disabled which will greatly affect SSD or SATA performance .
You may reload default values of BIOS and enable AHCI if you don't want to re-flash BIOS.

TOP

No F9c BIOS found in Gigabyte website , and F9e is a beta BIOS only .You better flash back to F8 . W ...
kfsin 發表於 2014-10-7 21:00



    will try ....................... 最後試吧

TOP

If you install win7 or win8 without using AHCI mode then NCQ is also disabled which will greatly aff ...
kfsin 發表於 2014-10-7 21:17


   ACHI enable improve performance ...... 知道了

   load 過 optimized settings and fail-safe settings, not OK
   
    ACHI disabled .... 先裝到OS ......, 不過裝到, 過一陣熄機, 再開就入唔到desktop
   
   gigabyte 有dual-bios, 係米長按PWR  >30sec 會back番個bios setting 出黎...???

TOP

相關文章