港版BRAVIA新firmware已出,4K 60FPS 4:4:4對應

港版出左更新,暫時睇HDMI已經可對應

4k  60Hz 4:4:4:/4:2:2/4:2:0 10bit

其他今晚再試

本帖最後由 wklie 於 2015-10-8 12:50 編輯

In my test of 49X8300C with new firmware, both audio track and subtitle track are forgotten after channel change, i.e. same as previous firmware.

Android is upgraded from 5.0.2 to 5.1.1

TOP

In my test of 49X8300C with new firmware, both audio track and subtitle track are forgotten after ch ...
wklie 發表於 2015-10-8 11:47


繁中字幕有冇改到固定係字幕1先

W800C琴晚冇話有firmware

TOP

繁中字幕有冇改到固定係字幕1先
minazuki 發表於 2015-10-8 12:21


Subtitle becomes OFF after a channel change.

TOP

Subtitle becomes OFF after a channel change.
wklie 發表於 2015-10-8 12:49


http://www.hkepc.com/forum/viewt ... ;page=9#pid33695881
set左會預設開第一條字幕

TOP

回覆 5# minazuki

Yes, thanks.

TOP

W800C已更新
字幕仍然係英文做第一條
今次更新仲未有畫中畫
好似只係多左playstation video,同設定多左個dualshock4可以用ps4手掣

TOP

In my test of 49X8300C with new firmware, both audio track and subtitle track are forgotten after ch ...
wklie 發表於 2015-10-8 11:47


ching, I am using the same model 49x8300c. There are only two power buttons which are located on the back of the tv and remote control.

I found that the TV only goes to sleep mode when I hit the power button. Do you think the life span will be shorter if it works like that? because I think it is like android device it goes to sleep mode instead of going to full power off mode.

Thanks!

TOP

43x8300c 已更新 home畫面順暢左好多

TOP

回覆 8# lllfyc

Yes, perhaps.  However, if you cut the power every time, the next power on will require a long boot time.

TOP