[外置硬碟] WD MyBook Change HDD

今日將隻 WD My Book 3T 換出來被PC 用, 裝番隻WD 2T Green 入去 My Book 個case 度, 真係吾 work, 有冇Ching 識攪?  謝謝

因為my book live個OS 放左落HDD, 所以 boot 唔返係正確.

TOP

樓主都冇話係 My Book Live

TOP

我試過將隻WD mybook studio 1TB拆開換入隻WD Green 2TB可以用到完全無問題, 我只知WD mybook case一定要用返WD Green系列嘅HardDisk, 都埋要check返果case最大容量support幾多, 唔同期唔同型號會有分別.

TOP

係 WD My Book 3T external HDD Drive.
換左隻2T HDD後, 以 USB 駁PC, 用Win7 磁碟管理認到隻 HDD, 但一format就話乜鬼IO error!

TOP

本帖最後由 halo0026 於 2015-1-2 14:14 編輯

之前睇過一篇關於mybook studio更換Harddisk嘅文章, 佢寫更換HardDisk要reset PBC, PBC塊板近電源位置附近有個空嘅jumper J6, 喺斷電斷連接嘅情況下用金屬棒接通個J6 Jumper一下(只係一下,唔係長期連接), 我之前部mybook studio換HardDisk有做過呢個動作, PBC真係有J6 jumper.

全文如下:
The onboard chipset memory of the MyBook Studio needed to be reset. When you remove the metal shielding, you see the circuit board and all of the different components. One of them is two metal prongs, an empty jumper (J6, may be different on your board), sticking out of the circuit board, near the DC power input. By shorting those jumper pins together with a metal screwdriver for 2 seconds (with the drive OFF and the power cord REMOVED!), the board will reset so it can recognize the new drive.

TOP

I have read this article before.  Cant find the J6 Jumper in the PCB. The one I have may be a newer version.

TOP