[隨身碟] 請推介外置2.5"硬碟盒出外隨身用

請推介外置2.5"硬碟盒出外用 --- 要輕細, USB3.0, 及可靠.  自備SSD
謝謝

push....

TOP

Magicpro有雙金屬幾薄下

TOP

用緊VE300

TOP

Magicpro有雙金屬幾薄下
garnett_v 發表於 2015-6-26 11:09 AM

Magic Pro used to have ASM1051 chipset which is good, but newer enclosure batches have redesigned PCB and unknown chipset, not recommended anymore

Also MP-F12 is only good for 9.5mm HDD models, if using 7mm models there will be excess space inside which may cause HDD to wiggle

Just bought Transcend 25S3 enclosure ($119-130), flimsy PCB and connector but nevertheless comes with reliable ASM1153e (SATA3) chipset
Fits up to 9.5mm HDDs but still, be careful when sliding HDD into the aluminium sleeve, if not careful the HDD"s surface (label side) will be scratched

Akasa Noir S ($150) also seems to have good build, but comes with JMS539 chipset which causes problems with some USB3 host controllers

OTOH VE300 seems to be more gimmicky than practical

TOP

. . .自備SSD
kenn 發表於 2015-6-22 09:26 AM

This is a problem even with the best HDD enclosure such as the Transcend 25S3
With SSD inside it will be recognised as a normal USB3 HDD and that TRIM command cannot be run
But with SSD it is very important to enable TRIM command
http://goughlui.com/2014/08/26/a ... 56gb-storejet-25s3/

TOP

回復 5 #anon893

我自己反而中部9 mm,有時唔知會用咩hdd
如果係7mm加塊spacer就ok
而且就算9mm有啲盒都會有虛位都係要涉少少野

TOP

用緊VE300
肥寶 發表於 2015-6-26 11:45



    好野來的..我都有一部....要加鎖用ZM-VE400

TOP

謝謝樓上各位師兄的意見. 因只用作外遊時暫時存RAW檔案用, 故有沒有TRIM功能都無所謂.
我會考慮Zalman ZM-VE400.

TOP