headphone有邊線斷左~ 求救!!~!

好似張圖咁. 有邊斷左.  整走左線皮. 見到 有2條線.  . 線入面包住好多條毛咁既野係到.. 第1次見呢d線. 點駁番佢T_T?
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

都係咁駁, "好多條毛"唔係電線, 唔洗理
紅同金係漆皮線, (我既做法)焊之前用辣雞輕輕刮下個頭就會刮走漆皮, 露出電線本身, 可以焊接
不過, 包左漆皮唔過電, 刮走左漆皮既線就會過電, 小心你兩氣線既焊點short左

TOP

咁.. 其實d"毛" 有咩用?

TOP

好似係裡面其實有條幼既[泥龍]線, 我估係等佢冇咁易被拉長拉斷

TOP

係唔係真,可以用火機燒到E D銅熔接
之前有人咁講但都冇試咁做

TOP

=0= .... 銅熔點好似13xx度 >_<

TOP

火機係只會燒熔d漆...咁就可以擰埋

TOP

u can try to connect them urself

TOP

原帖由 compcpu 於 2009-9-9 01:23 發表
u can try to connect them urself

樓主就係問點駁

TOP

好多條毛 is to make the cable structurally stronger. They do not need to be connected.

To connect the cables, just connect the shield (the bare metal) with the other shield, and the PVC cable to the other PVC cable.

You may solder them together, or just twist them together by hand.

For the PVC wire, of course, you need to remove the PVC first. You may use wire cutter or a scissor to strip away the plastic without cutting the metal wire.

TOP