洗手間門口木門框腳爛掉怎樣修理

因長期接近浴缸淺水於上,已經嚴重腐爛

原帖由 avdaemon 於 2009-9-6 18:32 發表
因長期接近浴缸淺水於上,已經嚴重腐爛

Do you mean 門框線?  It is not too expensive.  I would suggest to replace the whole set (3 inside and 3 outside).

TOP

原帖由 冰之風 於 2009-9-6 19:00 發表

Do you mean 門框線?  It is not too expensive.  I would suggest to replace the whole set (3 inside and 3 outside).


佢個情況應該唔係門框線only
建議樓主都係買過重裝

TOP

補原子灰

TOP

如果找師傅拆除門框再重新安裝,出面要收$2000禾
我祇想做一些簡單修補工程

TOP

原帖由 avdaemon 於 2009-9-6 19:54 發表
如果找師傅拆除門框再重新安裝,出面要收$2000禾
我祇想做一些簡單修補工程

To be honest, your quotation is not expensive as it including demolition and installation and door frame price.  If you don't have experience, it would be many problem.  BTW, if you just want to have a better appearance, you may make reference to the suggestion from starsnowyi or using cement as I did many years ago.  However, I don't think it would be last for long.

[ 本帖最後由 冰之風 於 2009-9-6 20:26 編輯 ]

TOP

係爛一段定成棟門爛晒?

慳皮方法
如果係爛一段就鋸左爛ge果段, 痴或釘塊新ge, 大小相若ge木上去, 補灰上油

又或者鋸左爛ge果段, 用牆之寶補到好似駁番條木框甘

[ 本帖最後由 zeroipm 於 2009-9-7 02:45 編輯 ]

TOP

原帖由 zeroipm 於 2009-9-7 02:43 發表
係爛一段定成棟門爛晒?


又或者鋸左爛ge果段, 用牆之寶補到好似駁番條木框甘


我的方法同你差唔多 不過會買10幾蚊英泥 填左佢就算
好似人鬼情未了 慢慢玩 不過效果(色水) 一定唔多好 仲要有心機 慢慢玩

[ 本帖最後由 find72 於 2009-9-7 02:56 編輯 ]

TOP

我會咁做:
1. 鋸左霉爛部分
2. 執幾條木方補番, 補到好似門框咁.
3. 用原子灰(唔好用牆之宝, 遇水好快散)批番個型,
4. 乾左就可以打磨, 上油, 為免唔同色, 最好成個框油過.
(純粹DIY 做法)

[ 本帖最後由 kentnklee 於 2009-9-7 08:26 編輯 ]

TOP

緊係去木工度買過好Dla,
之後再上油等等

TOP