[保養相關] ADATA SP920SS 出現 c4 error

Screen-Shot-2016-03-18-at-12.19.42-AM.jpg
2016-3-18 00:23

7x24 咁開,估唔到重差過隻舊 2T wd green ...

問題:
信邊個 app 好?

本帖最後由 qkuser 於 2016-3-18 00:52 編輯

好似三年保,再操操佢拎去保養.

TOP

回覆 1# fatdog

Normal if you're using MU01 firmware.  Upgrade to MU02.

TOP

本帖最後由 kelvinchm 於 2016-3-18 12:43 編輯

用緊MU01 firmware 就會有顯示問題
c4會顯示有16個

你經ADATA ssd toolbox update firmware to MU02就可以

TOP

omg!
一update 就 hang 左個 app
之後成隻 disk 連 bios 都認唔到 ...

重要係 OS disk 黎 ...

TOP

本帖最後由 wklie 於 2016-3-18 13:46 編輯

回覆 5# fatdog

Shut down, unplug SATA and power, wait for some time and try to boot it again.

If that does not work, try the following:

1. Plug in the drive's power cable *only* (not the data cable)
2. Boot the PC and let it sit for around 30 minutes.
3. With the PC power still on, plug in the SATA data cable.  Do not disconnect the power.
4. Press the PC's reset switch.

TOP

omg!
一update 就 hang 左個 app
之後成隻 disk 連 bios 都認唔到 ...

重要係 OS disk 黎 ... ...
fatdog 發表於 2016-3-18 13:30



    依家點?

TOP

依家點?
kelvinchm 發表於 2016-3-19 17:15


熄左幾個鍾
再開機就冇事
可能好彩

TOP

熄左幾個鍾
再開機就冇事
可能好彩
fatdog 發表於 2016-3-19 21:53

之前都唔少師兄反映,upgrade過程中會hang,強制關機再開番就OK。

TOP

回覆  fatdog
Shut down, unplug SATA and power, wait for some time and try to boot it again.

If that does not work, try the following:

1. Plug in the drive's power cable *only* (not the data cable)
2. Boot the PC and let it sit for around 30 minutes.
3. With the PC power still on, plug in the SATA data cable.  Do not disconnect the power.
4. Press the PC's reset switch.
wklie 發表於 2016-3-18 13:44


So troublesome!  If we're using somekind of all-in-one htpc of which there is no way to perform step 1 .... what should we do ?

TOP