各位用 Qnap snapshot 既要注意

已和 support 會報和確定問題
首先我是全新裝 4.2.0, 不是 4.1.4 update

create new storage pool, 會問你留幾多比 snapshot, 我留 10% (raid5 5TB / 500GB for snapshot)
跟住 create thick volume, 選 MAX
等 build 同 rsync 完成, system 睇會話用左 99% 位, 好....reboot
再入 system 睇.....點解分別有 volume, snapshot 10%, unallocated 9%
第一次問 support點解 MAX 唔係全部位, expand 安唔安全, 話冇問題, 但要 expand 兩次才剩 2GB unallocated
跟住發覺 snapshot 唔 work, 第二次問 support check, 原來unallocated snapshot 有用, 但現在唔知點解唔 lock 死係 snapshot 位, 請各位注意唔好 expand

已和 support 會報和確定問題
首先我是全新裝 4.2.0, 不是 4.1.4 update

create new storage pool, 會問你 ...
tongkai 發表於 2015-10-28 16:33

想問你話全新裝 4.2.0 係點裝法?

TOP

backup data, backup setting
wipe all HDD (delete all partition) need to use another computer to do
install back HDD, use Qfinder to install new firmware
complete the setup

TOP

本帖最後由 pc1668 於 2015-10-29 11:56 編輯
backup data, backup setting
wipe all HDD (delete all partition) need to use another computer to do
install back HDD, use Qfinder to install new firmware
complete the setup
tongkai 發表於 2015-10-28 23:36


Upgraded from 4.1.4 to 4.2.0
Selected the option: Restore to Factory Default - Reinitialize NAS
Followed the instructions to setup everything including the reformat of HDDs

Would it has the same effect of brand new install ... 全新裝 4.2.0?

re.jpg
2015-10-29 11:52


re2.jpg
2015-10-29 11:55

TOP

本帖最後由 tongkai 於 2015-10-29 13:37 編輯

都可以, 不過我唔想佢留低野冇 delete(萬一)
因為試過佢 factory reset, 佢幫我裝左 家用 mode, 即 install 埋 download station, media station....
但我係要 商用 mode, 要 delete partition 至比我由開始選......

當然可以之後改, 但佢會 create 好多我唔用既 folder

TOP

回覆 5# tongkai

選重新初始化,真正砍掉重煉

TOP