[操作疑難] S記DS216J加硬碟...

本帖最後由 vaninadh 於 2016-7-7 00:41 編輯


第一次加硬碟,咩都唔識..
等左成晚先得60%
佢個擴充係指兩個硬碟合埋一齊用?
唔知有無得SET做兩個硬碟分開用
例如4T爆左就抽出黎放第二個落去繼續備份新檔

> 佢個擴充係指兩個硬碟合埋一齊用?


> 唔知有無得SET做兩個硬碟分開用
有, 分兩個volume, 不過你依家都冇得咁做la, 因為你用左擴充左做Raid-1(SHR).......

依家如果要分返開個Raid 1的話, 你要......
0. Wait until the Raid-1 build complete
1. Shutdown NAS
2. Remove Disk 2
3. Start NAS (with Disk 1 only)
4. You will see a degraded Raid-1 in the system
5. Shutdown NAS
6. Insert Disk 2
7. Start NAS (with Disk 1+2)
8. You will see a degraded Raid-1 in the system.  System will ask you to rebuild/fix the Raid-1 problem(or it will tell you unable to fix)
9. Format Disk 2, create new volume in Disk 2
10. Move all the shared folder from Disk 1 to Disk 2
11. Format Disk 1, create new volume in Disk 1
Done

TOP

回覆 2# wunit


Disk one係後加,掉轉就可以了?..
佢個管理得一個擴充比我禁,
我都唔知要點Format
我仲諗住遲啲轉4 bay,咩都掉哂落去
放工試下 thx a lot

TOP