XY打印比例唔岩

用kossel mini
印20mm cube
x19.98 y19.68
己check 6枝rod 長度一致
點搞
thanks

本帖最後由 healingfoot 於 2014-12-16 15:32 編輯

I want to know too.......
Indeed your result already very good.
For X not equal to Y, I guess it is caused by the nozzle was not at the centre of the print bed (your's was very close) which I found very difficult to achieve.

TOP

真係關事...
endstop較返正 size正常返 thanks
但係我之前己經較到好正中心 螺絲上到好實
但係點解都會移位? 仲要移成幾mm

TOP