用咩軟件加嘅Support會易拆

試咗Slic3r加嘅Support同件工件好似連成一體咁好難拆。有冇第二個軟件加嘅Support會易拆啲呢?

可以試下Autodesk Mesh mixer

TOP

試過 KISSlicer 未?
可以set suuport 同工件既相距(Gap)
KISSlicer.jpg
2015-1-23 16:35

TOP

simply3d

TOP

simply3d

TOP

唔該晒咁多位,今晚試吓先。

via HKEPC Reader for Android

TOP

請問Kisslicr 用在閃豬機容唔容易搞 d setting?

TOP

回復 7 #diy0627

我覺得都算易,最緊要分清楚每個參數代表咩。

via HKEPC Reader for Android

TOP

回覆 8# prof2034


    In KISSlicer, the default of Gap is 0.5.  If Gap = 0, it means the support have no gap and will tightly adhere the main structure.  Some blogger suggest set the Gap in a multiple of X if you print the layer height of X, i.e. Gap=0.6 Print layer=0.2

TOP

回復 9 #healingfoot

Thanks good reference

via HKEPC Reader for Android

TOP