[操作疑難] 特急求教!!! GIGA 板問題

岩岩入左塊GA-Z77X-UD5H ,
插左兩塊GTX670 + 一塊OCZ RevoDrive 3
但部機完全認唔到塊OCZ RevoDrive 3,
已經BOOT 左好幾次, 都仲認唔到,有無人知係咩事?
各位ching 請幫幫手ORZ

OCZ RevoDrive 3 100%work?

TOP

100% WORK! 用過部舊機試過, 都認到, 無問題

TOP

係咪冇hdd? 可能張板認唔到張ocz 做hard disk

TOP

BIOS入面認唔認到先

TOP

呢D要裝driver(起raid) 先架喎

TOP

回復 5# star_hk

BIOS 認唔到 ,
應該唔關DRIVER事??

TOP

I dont think you have enough PCIe bandwidth on this Z77 chipset

TOP

下面資料來自技嘉網站GA-Z77X-UD5H
----------------------------------------------------------------------------------
1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)
* The PCIEX4 slot is available only when an Intel 22nm (Ivy Bridge) CPU is installed.
* The PCIEX4 slot shares bandwidth with the PCIEX8 and PCIEX16 slots. When the PCIEX4 slot is populated, the PCIEX16 slot will operate at up to x8 mode and the PCIEX8 will operate at up to x4 mode.
(The PCIEX16, PCIEX8 and PCIEX4 slots conform to PCI Express 3.0 standard.)
* PCIE Gen.3 is dependent on CPU and expansion card compatibility.

TOP

甘即係  PCIEX16 + X8 + X4 係假既??
GIGA 咩事R

TOP