[電腦組合] 請問宜家的X58 配 1366 多核CPU, 還有可取嗎?

本帖最後由 Ponya 於 2016-2-5 09:20 編輯

如題, 見到 PIC 3 & PIC 4 呢塊板有USB3.0, CPU可配4C8T. 請問這樣級數的組合, 相等於宜家的電腦乜野級數?

PIC 1 個塊雙路底板, 如果插兩粒6C12T CPU, 又會等於宜家電腦的乜野級數?

如果用來計數, 還PHOTOSHOP或video editing, 可以應付嗎?

另外, PIC 1 同 PIC 2 有甚麼分別? 兩塊板都係行雙路? PIC 2 個塊雙路大板點解會得咁少SLOT?
pic 1.JPG
pic 2.JPG
pic 4.JPG
pic 3.JPG

X58 CPU可以買X5650, 2.66Ghz 32nm 6t12c

4核版就大約=i5 低頻版

TOP

3GHz大概只等於現今2.2GHz左右,因為1366/1156上2011/1155係近幾代最大嘅進化
搞咁多野不如正經E5

TOP

TOP

I7-980 X58 32GB RAM DELL H700RAID CARD SSD RAID 5 爽用左幾年,仍然冇UPGRADE 動力........

TOP

依家用緊
入貨最好X5675/5680
兩粒U Rander少少3D圖(三千萬塊面)仲好快

TOP

X79好似抵玩D

TOP

回覆 1# Ponya

1. Pic.3 & 4 are X58 MB made by unknown mfgr so called  "山寨貨". only work with X5570 would easily beat by the current i3-6100 or even the older i3- 4160, why not go for uptodate i3 ? Forget this rubbish stuff, you won't regret !

2. PIC. 1 , this is 2-way workstation board. If you use 2 x X5650 (12C24T) would be equivalent to a X99 + 5820K, compare to perforemance with rendering and photoshop. With 2 x X5680 equivalent to X99 + 5960X... but double on power consumption & five years old stuff.

3. Pic. 2,  this is a sever board (SSI EEB) not suitable use for a workstation.

With limited budget 4-5K (MB + CPU + RAM), 2-way 1366 with 2 x X5660 (better X5675) + 48G ram would be considerate for rendering but no AVX !

For AVX, E3-12xx would be the cheap and best CP. For heavy workload. Go for X99 + 5820K....

TOP

X79好似抵玩D
p805061010 發表於 2016-2-6 02:13



unless you have x79 board already
it's easier to find a brand new cheap x99 board than a x79

TOP