[操作疑難] Win7 on Apollo Lake J3455

Ching, for your reference

I bought Asrock J3455M a week ago
and there is no way for intallment of properly working Win7

1. I use the original BIOS, no way to install win7 using usb
    and I switch to DVDrom + P/S2 keyboard and P/S2 mouse

==> finally work, Load win7 in SSD

     but I cannot load USB even I install the so call inf

2. I update BIOS from v1.0 to v1.2
    and the win7 dead, even unable to boot again with DVDrom

3. I downgrade BIOS from 1.2 to 1.0
    and still not work

so dont buy this sort of board unless u want to go for win10

it is disgusting that Microsoft and Intel deliberately disable usb after install win7
what sort of company it is

anyway, fine, i will try to go for Linux then

do u know which version Centos or Ubuntu will support Apollo Lake??
to let me avoid "Trial and Error"
thanks

同Skylake一樣
要Inject USB 3.0 driver入Win7 Installer先得
唔係故意, 而係Intel新chipset拎走左USB 2.0 controller
而Win7本身不支援USB 3.0

TOP

同Skylake一樣
要Inject USB 3.0 driver入Win7 Installer先得
唔係故意, 而係Intel新chipset拎走左USB 2.0  ...
KinChungE 發表於 2017-1-13 21:20

唔係win7唔支援usb3.0
而係win7唔支援xchi host

TOP

唔係win7唔支援usb3.0
而係win7唔支援xchi host
沙盒A 發表於 2017-1-13 21:34


成日覺得XHCI = USB 3.0, EHCI = USB 2.0

TOP

本帖最後由 god_md5 於 2017-1-14 00:50 編輯

試update bios ,應該識入bios張
CSM (Compatibility Support Module)
三個都改做舊bios,46葉
http://asrock.pc.cdn.bitgravity.com/Manual/J3455-ITX.pdf
整合光碟就睇
http://izaka.tw/w7sp2/
成功請試DeskMini driver
http://asrock.com/support/suppor ... 110%20Series#osW764
再同我試下pcsx2.........
http://pcsx2.net/download.html
linux要4.8核心以上先得

TOP

回覆 5# god_md5


    Thank you very much for your info
    I will try to do so to see if it works
    come back here later to update

TOP

回覆 3# 沙盒A


    how to make win7 support xchi host then?

TOP

回覆  沙盒A


    how to make win7 support xchi host then?
tsm 發表於 2017-1-14 01:08

你去asrock官網到搵下有冇driver for win7,如果有就可以跟佢指示塞個driver落隻win7安裝手指,冇就唔知了

TOP

相關文章