第一次用ati ~ 有野請教

用左好多年 intel onboard~ 前幾日轉左ati 4350
好滿意~ 但有個問題要請教~
我係佢control center 做左d avivo 既 setting~ 己經禁左 apply 同 ok
但係一reboot 就變返default (如圖中個d咁)~ 想請問應詃點搞
同埋可唔可以share 下你地既setting
thx
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

reinstall ccc & driver

TOP

本帖最後由 ccw 於 2010-1-25 22:44 編輯

I am sorry to tell that 4350 seems too weak to enable these functions and are disabled by ATi on default.
Even you switch them on, they should be not functioning.
Please make a test, by scrolling edge to 100 and watch a FullHD h.264 video, tick and untick the box to see if there is a difference.

In case you find it not working while would like to turn that on, you may try to follow this post:
http://www.hkepc.com/forum/viewt ... ;extra=#pid20910262

TOP

thx 兩位
而家唔會去返 default~ 但好似真係見唔到分別
同埋我冇記錯4 系可以同以硬解兩條片
岩岩試同時放兩條h264, 但係第二條會好窒

TOP

I am sorry to tell that 4350 seems too weak to enable these functions and are disabled by ATi on def ...
ccw 發表於 2010-1-25 22:42



    跟完你做之後真係有分別~~!
不過有個問題~ 就係條片feel 到有少少lag (好少..但係會feel 到)~ 唔通真係4350 唔夠力?

TOP

跟完你做之後真係有分別~~!
不過有個問題~ 就係條片feel 到有少少lag (好少..但係會feel 到) ...
kevinkok 發表於 2010-1-26 09:02


Sadly this is the fact.
You may consider buying a 4650 or above, or try to overclock a bit.

TOP

thx 兩位
而家唔會去返 default~ 但好似真係見唔到分別
同埋我冇記錯4 系可以同以硬解兩條片
岩岩 ...
kevinkok 發表於 2010-1-26 08:34


From official information, 4350 is not guaranteed to be able to DXVA two h.264 at the simultaneously smoothly................

TOP

Sadly this is the fact.
You may consider buying a 4650 or above, or try to overclock a bit.
ccw 發表於 2010-1-26 11:27



我要熄某d 功能先可以順d~
想請問你入邊咁多項邊一d 對畫質比較重要? 係咪Vector Adaptive 個項?
我可以試下只開開較重要個d功能

TOP

本帖最後由 ccw 於 2010-1-26 17:49 編輯

Vector is important only for interlaced content, like HD Jade
It is not necessary for 1080p movies.

For me, edge is also vital, set it to 25 will be fine.

TOP