[操作疑難] SLI 問題

本帖最後由 Maze 於 2015-4-5 21:55 編輯

隻GAME SUPPORT SLI 但玩果陣2ND CARD IDLE既0.0?? 係咩原因?
在NVIDIA SETTING 已SET開啟SLI

係咪因為隻GAME用單卡已可開全效? 所以第2張卡唔郁??


GAME: THE EVIL WITHIN @ 1080P (之前單卡770LIGHTING已可開全效)

應該係

TOP

應該唔係..係唔係隻GAME唔係真係支援架?

TOP

Try try Nvidia Inspector

TOP

應該唔係..係唔係隻GAME唔係真係支援架?
莎月美希 發表於 2015-4-5 22:12


佢話SUPPORT有可能是假的?
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

本帖最後由 Maze 於 2015-4-5 23:03 編輯
Try try Nvidia Inspector
Summer 發表於 2015-4-5 22:24



DL左,, 揀左THE EVIL WITHIN PROFILE, 之後ADD左APP去PROFILE APPLIED.

CARD 1: 70%
CARD 2: 25%

正常嗎0.0?

TOP

佢話SUPPORT有可能是假的?
Maze 發表於 2015-4-5 22:38



    我冇用過你果個程式,我只係用GEFORCE EXPERIENE,都冇咩好較就自動會行SLI.

TOP

我冇用過你果個程式,我只係用GEFORCE EXPERIENE,都冇咩好較就自動會行SLI. ...
莎月美希 發表於 2015-4-5 22:51



    果個只係NVIDIA SETTING 0.0 RIGHTCLICK GEFORCE EXPERIENCE 下面

TOP

東甩正常行晒2張卡


係隻GAME問題吧應該... 岩岩GOOGLE見人地都話SET唔到
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

Enable SLI • Link[edit]
Information By default the game profile does not have any SLI compatibility associated with it. Custom bits might used for a performance increase, as explained below.
Fix Modify game profile
Open the The Evil Within game profile via NVIDIA Inspector
Change SLI compatibility bits (DX1x) to 0x000000F5[4]
Change NVIDIA predefined SLI mode on DirectX 10 to SLI_PREDEFINED_MODE_DX10_FORCE_AFR
Change NVIDIA predefined number of GPUs to use on SLI rendering mode on DirectX 10 to SLI_PREDEFINED_GPU_COUNT_DX10_FOUR
Apply changes.
Notes
Information SLI scaling may be severely limited due to very high CPU usage in certain areas. SLI scaling may be confirmed through increasing graphical settings, unlocking framerate, and/or testing in corridor/non-open area type locations where CPU usage will be lower.

http://pcgamingwiki.com/wiki/The_Evil_Within#Enable_SLI

TOP