need help~ 裝左window xp 入唔返vista?

可以點做
我部notebook pre install左vista
之後我係同一個hdd介左個e:  出黎裝xp
但係我裝完xp restart後
直入window xp
我想del左xp 用返vista 可以點做呢?

我依家係 boot.ini
加左句野
If you have 1 physical drive with multi partition where x is the partition
number.

   multi(0)disk(0)rdisk(0)partition(X)\WINDOWS="Micro soft Windows Vista"
/FASTDETECT /NOEXECUTE=OPTIN

x果到我打1  

係dos個interface係多個option 
但都係我拍enter入依個option好似無反應咁...

Vista 0既 boot menu 要打 command (入 vista 喥打), 或者要用 DVD Boot 機搞, 最簡單係做 startup repair

TOP

我入唔到vista...
依句野我係xp 果到打的



DVD Boot  我果張係recovery disc...
我怕一野同我洗晒d野
有沒有方法口呀
唔該唔該

[ 本帖最後由 leepy 於 2009-9-5 17:00 編輯 ]

TOP

轉貼

試吓跟以下做

Making changes to the BOOT.INI (Windows XP)

Windows XP has a file called BOOT.INI to store the boot configuration which is saved in the root of the primary partition. After an image of OS1 is created and restored to the primary partition reserved for OS2, the file BOOT.INI of OS2 must be changed as quickly as possible to make sure it points to the primary partition the Windows is booted from. Editing this file is done by the sub System in the Control Panel, tab Advanced, button Settings at the area Startup and Recovery, button Edit (editing the BOOT.INI file can be done after booting from Bart's PE or VistaPE as well). The BOOT.INI for OS1 has the following content:

  [boot loader]
  timeout=30
  default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
  [operating systems]
  multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP .......

You will have to replace partition(1) with partition(2), partition(3) or partition(4), depending on what partition the new Windows XP is installed. Use the tool EFDISK or Windows Disk Manager (Control Panel, Administrative Tools, Computer Management, Disk Management) to find out which partition number to use.

TOP