[操作疑難] WakeOn LAN

hi,

I am testing WOL function.

I can wakeup my PC while the PC in sleep mode.

If my PC is SHUTDOWN, I am not able to wake it up~~

It that WOL must powering the PC on sleep mode?

Thanks

hi,

I am testing WOL function.

I can wakeup my PC while the PC in sleep mode.

If my PC is SHUTDOW ...
goconnect 發表於 1/6/2015 04:46 PM



    It that WOL must powering the PC on sleep mode? <- 唔係,但底板/網絡卡要開+支持WOL功能

TOP

Some PCs are like that
But first you may try another LAN driver version

Also, did you cut off the power supply after shutdown?
And have you tried waking the PC shortly after shutdown?

TOP

Sleep 的時候部 PC 背面的 LAN port LED 有無著?熄機時又有無著?

如果 Sleep 著但熄機時無著,應該是底板 and/or Windows 設定出錯。但 Sleep 和熄機都不著 LED 亦可能是正常,部份 LAN port/Router 設計著重慳電,係會關掉 LED,但其實是仍然運作,不過一係 Sleep 和熄機都熄 LED,一係兩個情況都著,不會一個情況著而另一個情況熄。

另外檢查下這個設定,如果要 WOL 叫醒部已 Shutdown 的電腦,應設定為開啟。


ps. 幅相 Capture 自手頭上用緊的 XP 機,但其它版本的 Windows 都應該有相關設定,不過,不同 H/W 的 Driver 可能用不同字眼,未必同上面幅相一樣,你要自己理解下每個選項的字面意思。
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

I Use SW "Wake  on Lan Command Line"
It Can Power On Target PC  by cmdline
      WolCmd.exe 009027a324fe 192.168.0.20 255.255.255.0
Target PC              Mac Address            IP            SUBNET  Mask

TOP