LAV Filters 0.68.1 released

本帖最後由 toylet 於 2016-5-23 22:41 編輯

Download: https://github.com/Nevcairiel/LAVFilters/releases

0.68.1 - 2016/05/05

LAV Splitter

  • NEW: Support for reading metadata tags from MKV files (including the "3d-plane" MVC 3D tag from MakeMKV 1.9.10 and newer)
  • Fixed: Improved handling of QuickTime codecs in MKV files
  • Fixed: S302M audio streams with non-pcm content did not work anymore (requires an external decoder)

LAV Video

  • Changed: Flags for BT.2020 are exported in DXVA2_ExtendedFormat (previously only reported to madVR, since the Windows SDK did not specify them)
  • Changed: Prevent connections to the "AVI Decompressor" filter which could result in a broken image or crashes otherwise
  • Fixed: Some progressive files could report the wrong FPS when software deinterlacing was turned on
  • Fixed: MPEG-2 streams using "intra refresh" did not decode properly

LAV Audio

  • Fixed: Decoding MPEG Audio streams from the Microsoft MPEG-1 Splitter could result in playback starting with an audible glitch

是否能用於pot player ?

TOP

是否能用於pot player ?
winsel 發表於 2016/5/25 00:34


應該得。裝完 LAV 開 PotPlayer 按 F5,在 Filter Control 下的 Splitter、Audio、Video decoder 入面有得揀 LAV。


不過,我係好耐之前整落,記憶中好似要先入去 Filter management 入面加入 LAV,我都不太記得要不要做這個步驟。另外,幅圖係來自比較舊版 PotPlayer,不肯定現在的是否一樣。我有裝 LAV 不過我個 PP 差不多全部用返 PP 本身的 Splitter/decoder,而且可能係個別版本問題(我個 LAV 都係舊),我個 PP 如果用 LAV 做 AC3 decoder,播放由 DVBViewer 錄出來並且經過 SmarterCutter 剪接過的 *.ts,有時播到剪接過的位置會停低,用其它 AC3 decoder 就無事。
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

LAV Video 有一個小問題係,fast forward 唔能夠instance playback,
每forward 一次,需要停頓半秒至一秒先會繼續播放

TOP