電腦領域 HKEPC Hardware 's Archiver

siukuenchi 發表於 2013-3-8 23:24

Sandisk Extreme 32G CF

I just got a 32G E-IV CF for my EEEPC 901 as the SSD via ZIF adapter.
Unfortunately it's NOT in fixed disk mode.
I've got the atcfwchg.com, but end up error. (error #20)
I think it's because it's not from IDE 0 / IDE 1.
And nowadays I think there will be no PCB with no SATA, so even I got the IDE-> CF adapter, it'll never be in IDE 0 / IDE 1.

I just thinking if I can get a SATA - CF adapter, plug into my i7 PC, then is it possible to let it go into IDE 0 or 1, and change it to fixed mode?

riskmgt 發表於 2013-3-9 13:06

CF ZIF adapter only support 16G CF Card only. Is your model really support?

siukuenchi 發表於 2013-3-9 13:29

[b]回復 [url=http://www.hkepc.com/forum/redirect.php?goto=findpost&pid=29549240&ptid=1933084]2#[/url] [i]riskmgt[/i] [/b]

I have no experience on it.
I don't know zif to cf support 16gb only!!
I forgot where I read it but I've read from foreign website that 32gb card can be used .....Bly.
I used 山寨版 adapter only

byleung 發表於 2013-3-10 09:46

應該可以轉係DESKTOP度BOOT 機
[url]http://item.taobao.com/item.htm?spm=a230r.1.10.41.cis3zh&id=14951905653[/url]

siukuenchi 發表於 2013-3-11 10:47

[b]回復 [url=http://www.hkepc.com/forum/redirect.php?goto=findpost&pid=29553968&ptid=1933084]4#[/url] [i]byleung[/i] [/b]


I can connect it and the CF can be detected in BIOS.
But seems the problem now is the CF card is in "removable" mode instead of "fixed disk" mode.
I tried many ways but even a dos boot disk cannot solve it.
Because even I boot with dos, seems the old drivers are too old, the CF cannot be shown up ...

eeeuser 發表於 2013-3-11 20:33

[i=s] 本帖最後由 eeeuser 於 2013-3-11 20:35 編輯 [/i]

你隻Sandisk Extreme 32G係唔係舊款?我見而家賣緊個的係支援UDMA7,我都有隻舊款Sandisk Extreme 32G 400X,我用ghost將XP HD image(唔用hibernate同虛擬記憶體)轉落CF後可以boot起XP,不過system仍然係 "removable"

如果新買都係咁,問鋪換隻transend 400X,呢隻可以支援fixed mode

頁: [1]

Powered by Discuz! Archiver 7.2  © 2001-2009 Comsenz Inc.