Board logo

標題: FX-8350 偷跑 [打印本頁]

作者: hioohi    時間: 2012-9-24 23:03     標題: FX-8350 偷跑

本帖最後由 hioohi 於 2012-9-25 21:06 編輯

SUPERKAMES from xtremesystems forum偷跑FX-8350




cinebench r13



cinebench r11.5
You can see the Cinebench R11.5 @4.5ghz ~ 7.7x pts .
--> at the same speed the I7 2600K ~ 8.82 pts as I know .

FX8350@4.5

FX8120@4.5


But in realworld application , with the two famous 3D aplication + renderer : 3dsmax 2011 + Vray 1.5SP5 , the thing you already know seem to be stronger.
Rendering time (second): Lower is better:
FX 8120@4.5ghz : ~ 679s
I7 2600K@4.5ghz : ~ 621s
The thing you already know :~ 580s



x264 FHD Benchmark


http://www.xtremesystems.org/for ... ns-test-fans/page33

performance per clock比上代bulldozer增長係唔同既application分別好大
x264 FHD Benchmark=+9.1%,cinebench r11.5=+4.7%,
realworld application,V-ray=+17%
作者: ediot    時間: 2012-9-25 13:24

what thing i already know??
作者: 7ming    時間: 2012-9-25 15:37

睇落幾好
作者: g1jockey    時間: 2012-9-25 21:04

如果平過現時8120/8150嗰價都仲會諗下…
(利申—1100及1045使用者)
作者: hioohi    時間: 2012-9-25 21:08

本帖最後由 hioohi 於 2012-9-25 21:09 編輯

+埋clock speed既提升,+10%
default FX8350 4Ghz比FX8150 3.6Ghz,睇呢幾個test multi-threading應該提升15-30%
作者: HKG5sentsp    時間: 2012-9-25 21:22

AS _ _ _ _ AS FAILDOZER
作者: 唐賓南紀念中學    時間: 2012-9-25 21:31

用緊Q8的我表示不感興趣
作者: dom    時間: 2012-9-25 22:57

SUPERKAMES from xtremesystems forum偷跑FX-8350


cinebench r13
Phenom II X6 @ 4.2GHz 都打唔贏
EPIC FAIL X2  AGAIN , Faildozer , PoopDriver (屎轉機)

AMD 你專心做好 APU  算吧啦
唔好再晒時間去整 EPIC FAIL 既 Faildozer V2.0 / V 3.0
FAIL 左就係 FAIL

You can't FIX SHI_ that's broken SO BAD
作者: dom    時間: 2012-9-25 22:59

如果平過現時8120/8150嗰價都仲會諗下…
(利申—1100及1045使用者)
g1jockey 發表於 25-9-2012 09:04 PM


問題係 FX-8350 之前有人貼過post 話新賣 會賣 $2K
咁既 Performance , 叫人點買得落手 ?

我買粒 Xeon E3 Ivy Bridge 放你星唔好?
作者: willy930    時間: 2012-9-26 10:15

cinebench r13
Phenom II X6 @ 4.2GHz 都打唔贏
EPIC FAIL X2  AGAIN , Faildozer , PoopDriver ...
dom 發表於 2012-9-25 22:57


If you take a look at the photos again, the rumored FX-8350 @ 4.52 GHz got 7.77. The one that tied with P II X6 is a FX-8120 @ 4.51 GHz.

Not saying getting 7.77 is great. But, there is indeed improvement for Cinebench 11.5.
作者: billy92005    時間: 2012-9-26 16:43

問題係 FX-8350 之前有人貼過post 話新賣 會賣 $2K
咁既 Performance , 叫人點買得落手 ?

我買 ...
dom 發表於 2012-9-25 22:59



新上架既價黎姐
唔賣咁既價錢邊有人同佢清推土機
清到7788就勁跌的了
初初推土機上架咪又係咁
肥龍2清到7788又勁跌
作者: 小幹炮    時間: 2012-9-26 19:36

一代不如一代...真失望
惜日..大件夾抵用既amd 去左邊
咁既價..+多幾舊玩煙條算
作者: dom    時間: 2012-9-29 13:14

If you take a look at the photos again, the rumored FX-8350 @ 4.52 GHz got 7.77. The one that tied ...
willy930 發表於 26-9-2012 10:15 AM


Still it's too expensive for such performance
作者: willy930    時間: 2012-9-29 16:21

Still it's too expensive for such performance
dom 發表於 2012-9-29 13:14


Well. This is pre-order price. And no one should get the first batch anyways.

And smart DIYer will get the FX 8320 to OC instead.  
作者: dom    時間: 2012-9-29 19:21

Well. This is pre-order price. And no one should get the first batch anyways.

And smart DIYer wil ...
willy930 發表於 29-9-2012 04:21 PM


I will get A10-5800K instead

作者: lcska02nkc    時間: 2012-9-29 19:36

提示: 作者被禁止或刪除 內容自動屏蔽
作者: cleverandy    時間: 2012-9-29 19:51

等推土去曬大部份貨,FX 83XX果堆應該會去到$12XX
作者: yoyo348    時間: 2012-10-1 13:52

等推土去曬大部份貨,FX 83XX果堆應該會去到$12XX
cleverandy 發表於 2012-9-29 19:51



    要1年
作者: providence    時間: 2012-10-1 14:42

提示: 作者被禁止或刪除 內容自動屏蔽
作者: Jamie06    時間: 2012-10-1 15:13

真係算吧啦......AMD摺左佢等Intel畀人拆成兩間公司算
作者: usei    時間: 2012-10-1 23:57

有得正式跑未  ?
作者: aeolian2009    時間: 2012-10-2 09:28

今日應該有啦掛
作者: uwantwant    時間: 2012-10-2 11:37

冇睇DETAILS, SUPERPI 快過I3 未? 平唔平過I3?
作者: wilsonkf    時間: 2012-10-2 11:55

提示: 作者被禁止或刪除 內容自動屏蔽
作者: Debitdou    時間: 2012-10-2 16:46

回復 1# hioohi


    自古 文明支持偷跑,而且效能讓人驚訝!! 偷跑沒什麽大不了.





歡迎光臨 電腦領域 HKEPC Hardware (https://www.hkepc.com/forum/) Powered by Discuz! 7.2