Board logo

標題: Buffalo WZR-HP-G300NH [DD-wrt] work in progress !!!! [打印本頁]

作者: sckds    時間: 2010-1-17 14:44     標題: Buffalo WZR-HP-G300NH [DD-wrt] work in progress !!!!

希望快d 有得flash la

冇 NAT Loopback 好麻煩
作者: ccw    時間: 2010-1-17 18:48

Good news.
Hopefully it can provide us with a full FTP function instead of web access, and without performance drop.
Also, hopefully the UPnP issue will disappear.
作者: Steven Leong    時間: 2010-1-17 20:01

好野 等到la 等到la
作者: sckds    時間: 2010-1-17 22:24

Good news.
Hopefully it can provide us with a full FTP function instead of web access, and without p ...
ccw 發表於 2010-1-17 18:48


DD-wrt 既UPnP有問題 ?
作者: ccw    時間: 2010-1-18 00:00

回復 4# sckds

No, it is the original firmware which has UPnP issue.
作者: sckds    時間: 2010-1-18 00:36

回復  sckds

No, it is the original firmware which has UPnP issue.
ccw 發表於 2010-1-18 00:00



1.6 / 1.65 / 1.67 ?

what's the problem ?
作者: ccw    時間: 2010-1-18 01:26

本帖最後由 ccw 於 2010-1-18 01:29 編輯

回復 6# sckds

I encountered that with all versions available now(not yet try 1.7).

Using UPnP to map the port, sometimes it will fail(maybe ok in the monrning, without touch the computer nor router, in the evening you find that ports are closed, ports are not coorectly mapped.), no matter changing the ISP, restarting the computer.
Only solution is to switch off UPnP of router, reboot the router, restore UPnP.
Then the function will be ok again.





歡迎光臨 電腦領域 HKEPC Hardware (https://www.hkepc.com/forum/) Powered by Discuz! 7.2