作者: redcarcar 時間: 2017-5-24 15:40 標題: $500內,邊隻router 行openwrt 比較易裝,快同穩定?
本帖最後由 redcarcar 於 2017-5-25 10:07 編輯
如題
作者: 某人兄 時間: 2017-5-24 15:54
Archer C7 v2 $499 有$1 找
利申買咗3部,兩部OpenWRT 一部DD-WRT,遲啲轉埋 OpenWRT
作者: dbp 時間: 2017-5-24 16:57
newifi d1 淘寶 $300,港版火牛 $15,集運 $15,合計港紙 $330
作者: redcarcar 時間: 2017-5-24 16:58
定係買隻Asus 68U 刷Merlin 好?
作者: faihome8 時間: 2017-5-24 18:37
梅林多咗咩
via HKEPC Reader for Android
作者: noyfb 時間: 2017-5-24 18:37
不要買 低b link C7 啊
已中伏 比較難改成openwrt / lede
USB 又很慢
好處係 openconnect / shadowsock 都可安裝
買netgear R7000 一步到位 又有merlin 玩
作者: redcarcar 時間: 2017-5-24 20:56
r7000易裝d?其實我想用shadowsocks
作者: 321 時間: 2017-5-24 21:09
我唔明有咩難,stock firmware無痛直升openwrt,易過食生菜
作者: 某人兄 時間: 2017-5-24 21:32
r7000 要近$1000

如果要搵merlin,都係out bud,點解唔買 tender ac9

作者: redcarcar 時間: 2017-5-24 21:38
$1000 都可以如果真係有好處
作者: redcarcar 時間: 2017-5-24 21:41
本帖最後由 redcarcar 於 2017-5-24 21:42 編輯
deleted .
作者: redcarcar 時間: 2017-5-25 09:58
R7000 可唔可以用stock firmware 直接upload openwrt 個file upgrade 成openwrt?
如果唔得咁邊隻得?
我想要隻$1000上下易安裝少鑊氣傳輸快既router
作者: redcarcar 時間: 2017-5-27 15:38
Archer C7 v2 有d巴打話難有d話易
好亂呀
BTW, google 過真係無咩教學, 資訊好亂
作者: hkwtongme 時間: 2017-5-27 17:01
如果唔係用原廠firmware,幾時都係買大路嘢會好啲,一來有事都多啲人可以幫手,二來寫firmware嘅人都會多啲,冷門嘢有事如果唔可以搵原廠都多數係搵自己嚟搞,咁就要睇平得多唔多同自己夠唔夠料唔使搵人幫。
作者: redcarcar 時間: 2017-5-27 17:09
可唔可以建議幾部多人用穩陣而又裝到openwrt既?
作者: hkwtongme 時間: 2017-5-27 22:45
你可以參考下面條link。
https://lede-project.org/toh/start
作者: redcarcar 時間: 2017-5-27 22:54
TP-Link Archer C7 V2 裝openwrt 似乎會有少少鑊氣
https://wiki.openwrt.org/toh/tp- ... p-link_archer_c7_v2
Installation of TP-Link Archer C7 V2
(Updated and tested on March 2017 by orenr)
TP-Link are checking for the file signature in order to verify it. Once trying to flash OpenWrt you will encounter the following error:
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.
For TP-Link Archer C7 v2.1 it is enough just to rename the factory image to something like factory.bin, then just upload it like a firmware upgrade.
Use the following workaround (based on https://www.gargoyle-router.com/ ... .php?f=8&t=8210)
1.Download appropriate modified version of DDWRT that passes the TP-Link verification: http://www.dd-wrt.com/phpBB2/vie ... 84f914718a843aa2ea4
Please notice that there are three different versions - US version, General international and an Israeli version. Download the version suitable for your device. Flash the DD-WRT firmware. Please note that TP-Link defaults to 192.168.0.1, but DD-WRT defaults to 192.168.1.1, so make sure to reconnect the ethernet cable if your DHCP client cannot figure it out.
作者: redcarcar 時間: 2017-5-27 22:56
TP-Link TL-WR841ND 就好簡單
https://wiki.openwrt.org/toh/tp- ... p-link_archer_c7_v2
Installing via web interface:
Download image for your version.
Log in to router web interface and select the firmware image you just uploaded as an update.
Sit and wait while it flashes. It will reboot and be accessible at 192.168.1.1.
作者: redcarcar 時間: 2017-5-27 22:59
r7000 , 官網無講點install Openwrt
https://wiki.openwrt.org/toh/netgear/r7000#installation
作者: Crash9898 時間: 2017-5-27 23:06
TP Link Archer C7 是国内乜相对广應 model ?
Thanks for the input
作者: 某人兄 時間: 2017-5-27 23:45
TP-Link Archer C7 V2 裝openwrt 似乎會有少少鑊氣
Installation of TP-Link Archer C7 V2
(Updated an ...
redcarcar 發表於 2017-5-27 22:54
lede filename 長得滯食唔到嘛,之前download完之後改咗upload.bin就得
作者: redcarcar 時間: 2017-5-28 02:05
係咪要買V2.1 先無事
V2.0 都唔得?
作者: 某人兄 時間: 2017-5-28 09:20
買2.0
作者: C_Y_C 時間: 2017-5-28 17:39
C7 $500 内絕對無對手.
作者: redcarcar 時間: 2017-5-28 18:40
巴打麻煩check 下你果幾部c7 係 v 幾多?係咪盒上有寫的?
是否在官網download firmware 之後改個短d既名就可以在original firmware 既 firmware upgrade度upload 上去就改成 openwrt呢?
另外你有無用shadowsocks?你用邊個網上既tutorial?可以睇睇?
作者: 某人兄 時間: 2017-5-28 19:16
盒上會寫 Archer C7 Version 2.00
我直接上最新版 LEDE,然後裝OpenConnect,ShadowSocks無玩,因為我用緊iPhone
作者: 雯雯 時間: 2017-5-28 19:46
盒上會寫 Archer C7 Version 2.00
我直接上最新版 LEDE,然後裝OpenConnect,ShadowSocks無玩,因為 ...
某人兄 發表於 2017-5-28 19:16
iphone都可以玩ss.
作者: redcarcar 時間: 2017-5-28 21:01
盒上會寫 Archer C7 Version 2.00
我直接上最新版 LEDE,然後裝OpenConnect,ShadowSocks無玩,因為 ...
某人兄 發表於 2017-5-28 19:16
LEDE又係咩黎?
我本黎以為係咁升:
在 openwrt 官網 c7 個 page download v2既 file,改個短d既名
在original firmware "firmware upgrade" 個 page upload 個 page upload 個 file 上去
等一陣就會變成openwrt
你係唔係咁做的?又多左個 lede既?係咩黎?
作者: 321 時間: 2017-5-28 21:25
Lede係openwrt的一個分支,類似石像鬼,建議用放官方openwrt,有問題尋求支援都易好多
via HKEPC Reader for Android
作者: platinum 時間: 2017-5-28 21:44
openwrt 已經無 developer了, 全部轉哂去 LEDE
不過第日佢地又會合併翻
作者: redcarcar 時間: 2017-6-3 18:43
本帖最後由 redcarcar 於 2017-6-3 19:52 編輯
deleted
作者: solexkey 時間: 2017-6-3 19:54
本帖最後由 solexkey 於 2017-6-3 20:09 編輯
factory rom好多時有機制唔俾刷third party rom, 如果 openwrt/lede 對應型號對應H/W version嗰 D 有factory 字樣嘅 firmware試過唔得嘅話, 可以 google 吓有無得先經dd-wrt再刷 openwrt/lede
e.g. http://www.dd-wrt.com/phpBB2/vie ... befd44d7f68443191b8
好多router都喺咁
亦有可能downgrade factory rom 去一 D 舊嘅 factory rom version , 就可以load 到 openwrt/lede 對應型號對應H/W version嗰 D 有factory 字樣嘅 firmware, 我試過有router可以咁解決, 當然唔包隻隻得
作者: Stevenchun 時間: 2017-6-3 19:56
http://www.mi.com/miwifi3g/
呢隻應該性價比唔差
作者: solexkey 時間: 2017-6-3 20:04
本帖最後由 solexkey 於 2017-6-3 20:06 編輯
http://www.mi.com/miwifi3g/
呢隻應該性價比唔差
Stevenchun 發表於 2017-6-3 19:56
要有third party firmware, 要假以時日
http://www.hkepc.com/forum/redir ... 58&pid=36341096
作者: 某人兄 時間: 2017-6-3 20:11
1. 總之買2.0 (唔好買2.1/2.0.1...總之就2.0)
2. https://downloads.lede-project.o ... quashfs-factory.bin
3. 改名
4. 192.168.1.1 -> login -> firmware upgrade
5. 等
6. login,改成password
7. 其餘我懶+用緊OpenConnect嘅關係,ssh root@192.168.1.1, opkg update, opkg install luci-app-ocserv luci-app-ddns
8. 安裝完成後,喺web set openconnect, firewall rules, ddns client
9. Profit
Ref:
https://wiki.openwrt.org/doc/howto/openconnect-setup
https://wiki.openwrt.org/doc/howto/ddns.client
作者: redcarcar 時間: 2017-6-3 20:15
factory rom好多時有機制唔俾刷third party rom, 如果 openwrt/lede 對應型號對應H/W version嗰 D 有factor ...
solexkey 發表於 2017-6-3 19:54
2
yes, 我先刷ddwrt, 再刷個downgrade 既stock firmware, 依家成功刷左openwrt
依家開始裝shadowsocks server
作者: redcarcar 時間: 2017-6-3 20:52
再confirm 一下, archer c7 係味行71xx 條script?
http://ntgeralt.blogspot.hk/2015/12/openwrtshadowsocks.html
作者: redcarcar 時間: 2017-6-3 21:07
我打第二行,有error ...
-----------------------
root@OpenWrt:~# wget http://www.drivehq.com/file/DFPublishFile.aspx/FileID319396
0289/Key0hsi1wjgdyc0/libev-ss-server_2.4.5-1_ar71xx.ipk
Connecting to www.drivehq.com (66.220.9.57:80)
Connecting to www.drivehq.com (66.220.9.57:443)
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
--------------------------------------------------------
作者: 某人兄 時間: 2017-6-3 22:45
我打第二行,有error ...
-----------------------
root@OpenWrt:~# wget
0289/Key0hsi1wjgdyc0/ ...
redcarcar 發表於 2017-6-3 21:07
裝咗 openssl-util 先。

