作者: lung510 時間: 2019-8-25 00:46 標題: mpls question
let say i apply a 9Mbps mpls to connect multi branch offices
that means all 9Mbps bandwidth is in high priority?some ppl told me that, inside mpls, the isp will divide 9Mbps into 3 parts, high priority, middle and low priority?is that real?
作者: tomchanmot 時間: 2019-8-25 18:10
Depends on your subscription, MPLS has 3 classes, gold, silver & bronze.(classes of service-cos)
100% gold is the most expensive, 100% bronze will be most cheapest.
Gold-for VOIP, VC
Silver for erp, crm, mail
Bronze for normal use, data transition
You can apply like that-30% gold, 30% silver, 40% bronze
The use of cos just like qos.
作者: lung510 時間: 2019-8-25 21:18
Depends on your subscription, MPLS has 3 classes, gold, silver & bronze.(classes of service-cos)
10 ...
tomchanmot 發表於 2019-8-25 18:10
i just wonder why need 3 classes?
as i know mpls is sth like leased line, and im the only one use that network,
let say if i do the qos on firewall, match vc,voip traffic , next hop set to mpls ,
other traffic, next hop set to site to site ipsec.
why i still need gold class? why not just buy bronze?
作者: wyhui5124 時間: 2019-8-25 22:15
"as i know mpls is sth like leased line, and im the only one use that network,"
响客戶層面就覺得係自己駁咗去private network,但實際上packet係入咗ISP個大network,而個大network會有好多唔同客戶同時用緊,每個客戶只係一個Virtual Private Network,當某個node某一刻太多traffic時,就要有QoS去控制packet嘅優先程度。
作者: tomchanmot 時間: 2019-8-26 10:28
i just wonder why need 3 classes?
as i know mpls is sth like leased line, and im the only one ...
lung510 發表於 2019-8-25 21:18
Because not just you subscribed the MPLS service from the ISP, actually, 100% gold will be more stable & short latency than 100% bronze.
The bandwidth of MPLS is share based not dedicated, that means if you use bronze bandwidth for VOIP & VC, there will no any guarantee. If you want dedicated bandwidth, you should apply IEPL, but the cost will be more higher then MPLS.
作者: winle01 時間: 2019-8-27 11:20
回覆 1# lung510
not all HK ISP do that .