標題: 求救！ 安裝新window10 遇上消失的970 pro 1TB [打印本頁]

---

作者: 15灰熊    時間: 2019-4-28 14:14     標題: 求救！ 安裝新window10 遇上消失的970 pro 1TB

底板：碩仔 Rampage extrem V. X99
970 pro 上機後反而detest 唔到，
不知道是否Bois setting 出現問題
有師兄可以救我嗎？😭😭😭

---

作者: PT100    時間: 2019-4-28 19:58

回覆 1# 15灰熊

1. Reset CMOS, thence reboot and check in BIOS whether you can see the 970 Pro or not

2. If the PCI-E x4_8 slot (the bottom one) being used, the M2 slot will be disable !!!

3. Make sure the 970 Pro SSD is working

4. If you are using PCI-E adapter to install the 970 PRO on the PCI-E slot (most people doing this to obtain the maximum speed), the adapter might also need to check cause I experienced the adapter damaged cause people mistaken that the SSD was defected but actually NOT...

---

作者: 15灰熊    時間: 2019-4-28 22:49

試著師兄的方法，除了第三項沒有試，但新買的應該沒問題吧。雖然我是失敗了，但都非常感謝師兄幫忙

---

作者: chue    時間: 2019-4-28 23:31

可能插唔實

---

作者: chanmingfu    時間: 2019-5-2 12:05

brush the slot to clean.
try insert a few times.