標題: QNAP NAS problem [打印本頁]

---

作者: sttam    時間: 2011-11-13 12:29     標題: QNAP NAS problem

新手剛入QNAP TS219P+，雖己設定hd於十五分鐘內沒有存取便休眠及使用最新firmware，甚至拔除lan線後，均不能進入休眠狀態，hd燈依然亮著。請問如果解决？謝謝。

---

作者: jwong2k04    時間: 2011-11-13 22:08

果個係LED 熄左你反而要驚~~~
HDD LED status:
1) Flashes red - The disk data is being accessed and a read/write error occurs during the process
2) Red - A hard disk drive read/write error occurs
3) Flashes green - The disk data is being accessed
4) Green - The hard disk drive can be accessed
---------------------------
試 idle >15mins 後抄file 入 NAS
NAS 會頓十幾秒(spin-up 隻 HDD)先開始做野
耳仔近的話都聽到摩打開始打轉聲

---

作者: sttam    時間: 2011-11-14 17:40


LED will be off
Anyway, thx for ur advice.

圖片附件: 2011-11-14_173801.jpg (2011-11-14 17:39, 24.16 KB) / 下載次數 16
https://www.hkepc.com/forum/attachment.php?aid=1275889&k=7c8a06a2ad4e58748b0060e4554aeed7&t=1782587579&sid=2Nzx6WTPEa

---

作者: 炎冬    時間: 2011-11-15 00:50




    我都試過...時得時唔得...不過之後都沒理佢..因為用左來PT..一定長閃..