作者: rockie520 時間: 2017-6-10 15:39 標題: Barrows or Bykski ?
i saw these water cooling kits on web
wondering which one is better ?
planning on watercooling
thanks
作者: franky7080 時間: 2017-6-10 18:59
No difference. Both are made in China. Quality is not predictable.
作者: rockie520 時間: 2017-6-11 12:16
No difference. Both are made in China. Quality is not predictable.
franky7080 發表於 2017-6-10 18:59
I know ek and other are way much. better..but its hard to get those.
作者: samhcl 時間: 2017-6-11 12:21
I know ek and other are way much. better..but its hard to get those.
rockie520 發表於 2017-6-11 12:16
you mean cost issue or other reasons? most big brands can ship worldwide
作者: rockie520 時間: 2017-6-12 02:37
回覆 4# samhcl
其實吾想太貴，當然冷頭入Ｅｋ，但fitting同管同pump感覺吾大分別. 所以想用國貨
作者: bibilubi 時間: 2017-6-12 09:13
回覆 samhcl
其實吾想太貴，當然冷頭入Ｅｋ，但fitting同管同pump感覺吾大分別. 所以想用國貨 ...
rockie520 發表於 2017-6-12 02:37
國貨都有好多級
Fitting平至3蚊粒
貴到30蚊粒都有
via HKEPC Reader for Android
作者: mattzxc 時間: 2017-6-12 11:25
回覆 samhcl
其實吾想太貴，當然冷頭入Ｅｋ，但fitting同管同pump感覺吾大分別. 所以想用國貨 ...
rockie520 發表於 2017-6-12 02:37
PUMP如能力可以都用外國貨啦
PUMP個位置都幾重要架
作者: rockie520 時間: 2017-6-12 12:31
回覆 7# mattzxc
thanks c ching
作者: casoncason 時間: 2017-6-16 17:01
回覆 7# mattzxc
I'm new to water cooling. I heard is it all D5 pump are made from just one single manufacturer (Laing) ? Every different brands we can buy were OEM/ODM ?
作者: ineedu 時間: 2017-6-23 08:32
Fitting 差唔多O ring最緊要冷頭買返大廠
作者: chun20077 時間: 2017-6-23 11:46
我買左國b 2年冇漏 ba就買3通出水位 用左2年成部機都係塵
作者: rockie520 時間: 2017-6-23 19:10
我買左國b 2年冇漏 ba就買3通出水位 用左2年成部機都係塵
chun20077 發表於 2017-6-23 11:46
國b ? === bykski ?