Board logo

標題: [手提電腦] 收回自用 [打印本頁]

作者: typer77    時間: 2019-3-21 11:49     標題: 收回自用

本帖最後由 typer77 於 2019-3-22 18:57 編輯

85-90% new condition,
everything works 100%
i5-6300U
8GB RAM (not 16GB in picture)
120GB SSD SATA
1080P (upgraded. original 1366 x 768 panel will be included)
2 new batteries (1 external 6 cell + 1 internal 3 cell) full charge over 8 hours
lenovo HK good warranty  - expires in 700+ days (14/3/2021)
Trade in Wan Chai / CWB station only.

start: 2800
step:50
eat: 3000

[attach]2116072[/attach]
[attach]2116071[/attach]
[attach]2116069[/attach]
[attach]2116070[/attach]
[attach]2116068[/attach]
[attach]2116067[/attach]
作者: kwyeung8    時間: 2019-3-21 21:30

即係仲有一條ram slot, 同萬一要拎去整, 要換返原本個芒先受保?
作者: typer77    時間: 2019-3-21 21:41

what's included: 4GB x 2
Mon is very easy to change. remove the plastic edge, then 4 screws. Afterwards, unplug and plug.
作者: Cacodemon    時間: 2019-3-21 22:31

部機有乜野係改動過e.g. ram 16GB > 8GB ?
作者: Cacodemon    時間: 2019-3-21 22:33

另外,
1) ram 有冇焊死左? 可唔可以自已加ram
2) 個ssd 係咪都可以自已換?
作者: typer77    時間: 2019-3-22 00:16

另外,
1) ram 有冇焊死左? 可唔可以自已加ram
2) 個ssd 係咪都可以自已換?
Cacodemon 發表於 2019-3-21 22:33


1. Not soldered. 2 RAM slots. max 32GB. so u need 2 X 16GB. Currently 2 x 4GB
2. yes. can change.
作者: nganshiu    時間: 2019-3-22 15:09

Display card?





歡迎光臨 電腦領域 HKEPC Hardware (https://www.hkepc.com/forum/) Powered by Discuz! 7.2