Board logo

標題: 求推介 MATX Case [打印本頁]

作者: AhMingHK    時間: 2020-9-2 20:41     標題: 求推介 MATX Case

Please recommend a case fitting the following:
- length less than 21cm (less is better)
- x399m with 1950x
- 280 AIO or 240 AIO (less preferred) or a wind-blow CPU HS if the case can fit it
- ATX PS or SFX PS (less preferred)
- has room for RTX3060, 3070 or 3080 (not decide which one yet)
- RGB is not necessary

considering either TT Core G3 or Nzxt H400i. currently using C1, any other recommendation? thanks.
作者: sport    時間: 2020-9-3 11:29

Antec VSK10

作者: wahw    時間: 2020-9-8 10:24

silversrone ps15
作者: kan_hung    時間: 2020-9-8 15:20

回覆 1# AhMingHK


Antec P5
有碟機前面裝到240水冷

via HKEPC IR Pro 3.6.1 - iOS(3.0.0)
作者: 9s9s9    時間: 2020-9-8 16:02

借位一問
有冇類似款式或黃金高登有賣 THX
只支援MATX 前置可3X120 ATX牛
https://detail.tmall.com/item.ht ... skuId=4521583730396
O1CN01tJsFpZ2Aqq6CPtNRV_!!2377518255.jpg

圖片附件: O1CN01tJsFpZ2Aqq6CPtNRV_!!2377518255.jpg (2020-9-8 16:01, 90.68 KB) / 下載次數 65
https://www.hkepc.com/forum/attachment.php?aid=2216590&k=9c2abad6da41f7d49d9ea5dff4dea24c&t=1781392083&sid=vprRbiMQuL


作者: tek2    時間: 2020-9-9 18:45

本帖最後由 tek2 於 2020-9-9 19:00 編輯

Lian Li Lancool 205m matx case
210 mm (W) x 415 mm (D) x 400mm (H)
Cpu cooler max height 160mm
不過只support 240 aio 同唔知香港有冇貨

PSU 180mm, gpu 375mm 夠放30xx卡

via HKEPC Reader for Android
作者: AhMingHK    時間: 2020-9-9 23:15

thank you all. finally buy from a member here with TT Core G3 as it is slim. actually, there is another constraint. if it is 16.5+ cm wide, I have to change monitor. Now, i need to change to use SFX PS. I have gone to taobao to change to another side panel cover as the current CPU is Noctua U9S which requires a few more mm as it hits the panel.





歡迎光臨 電腦領域 HKEPC Hardware (https://www.hkepc.com/forum/) Powered by Discuz! 7.2