Board logo

標題: QNAP QGenie 7in1 NAS disappears from manufacturer's website [fixed] [打印本頁]

作者: pc1668    時間: 2015-11-30 10:30     標題: QNAP QGenie 7in1 NAS disappears from manufacturer's website [fixed]

本帖最後由 pc1668 於 2016-2-27 18:08 編輯

QNAP QGenie QG-103N
http://www.hkepc.com/12392

QG-103N is not found    in Product overview / 產品總覽.  It was there weeks ago!
Product overview
https://www.qnap.com/i/en/product/

產品總覽
https://www.qnap.com/i/cht/product/

The article is not available.
https://www.qnap.com/i/in/product/model.php?II=141

本文章目前不開放瀏覽
https://www.qnap.com/i/cht/product/model.php?II=141

As such, we can't even check if there is any firmware/doc update

Is there anything wrong with this product ?


Update (Feb 2016) :

QGenie is back !
https://www.qnap.com/i/cht/product/model.php?II=141
作者: pc1668    時間: 2015-11-30 12:32

本帖最後由 pc1668 於 2015-11-30 13:01 編輯

Nobody knows why

They've even removed all the relevant download links regarding this product

May be I have to send an email to QNAP sometime later
作者: pc1668    時間: 2015-12-1 12:34

本帖最後由 pc1668 於 2015-12-1 12:37 編輯

Now they suddenly added back the download link

https://www.qnap.com/i/en/produc ... ?type=13&II=141

https://www.qnap.com/i/cht/produ ... ?type=13&II=141

However, QG-103N is still not found in Product overview
作者: karsocrates    時間: 2015-12-1 14:54

咁係咪唔會再有UPDATE?
作者: pc1668    時間: 2015-12-1 14:56

本帖最後由 pc1668 於 2015-12-1 15:28 編輯
咁係咪唔會再有UPDATE?
karsocrates 發表於 2015-12-1 14:54


the last firmware update was on 2014/12/17, a year ago !
作者: JKC710    時間: 2016-2-26 23:22

the last firmware update was on 2014/12/17, a year ago !
pc1668 發表於 2015-12-1 14:56


https://www.qnap.com/i/cht/product_x_down/product_down.php?II=141
作者: karsocrates    時間: 2016-2-27 00:44

回覆 6# JKC710

終於有新firmware, thanks ching
作者: pc1668    時間: 2016-2-27 08:52

回覆  JKC710

終於有新firmware, thanks ching
karsocrates 發表於 2016-2-27 00:44


oh yes !!!!!
v3.2.1
作者: lennon    時間: 2016-2-27 09:30

即update先,呢隻野帶去旅行真係一流
作者: pc1668    時間: 2016-2-27 10:18

即update先,呢隻野帶去旅行真係一流
lennon 發表於 2016-2-27 09:30


Yes! I've gave up my wireless hdd (too heavy) and used this tiny qgenie for travel.
作者: karsocrates    時間: 2016-2-27 18:40

Yes! I've gave up my wireless hdd (too heavy) and used this tiny qgenie for travel.
pc1668 發表於 2016-2-27 10:18


me too
可惜內置容量太細, 要帶多隻手指去做backup
作者: pc1668    時間: 2016-2-27 22:20

me too
可惜內置容量太細, 要帶多隻手指去做backup
karsocrates 發表於 2016-2-27 18:40


My qgenie storage capacity is 96GB (32GB SSD + 64GB SD)
And yes, we can insert a 手指 of whatever capacity to further increase the total capacity.
Actually I've tried to insert a 2TB usb hdd and it works!
作者: penguinsam    時間: 2016-2-27 22:22

想問Wifi連緊部嘢時,電話仲用唔用到4G上網?
作者: pc1668    時間: 2016-2-27 22:34

本帖最後由 pc1668 於 2016-2-27 22:35 編輯
想問Wifi連緊部嘢時,電話仲用唔用到4G上網?
penguinsam 發表於 2016-2-27 22:22


cannot

u need to set the qgenie to connect to another source of network access (wifi, wired, etc.)

as such, the mobile will access the Internet via qgenie
作者: karsocrates    時間: 2016-2-28 00:36

My qgenie storage capacity is 96GB (32GB SSD + 64GB SD)
And yes, we can insert a 手指 of whatever  ...
pc1668 發表於 2016-2-27 22:20


因為我係真接拎相機張SD卡插入QGenie度做backup, 所以冇位再插extra SD卡

師兄帶部野去旅行都係用黎backup相? 請問你插左extra SD卡後可以點backup? 相機用usb線連去QGenie當card reader?





歡迎光臨 電腦領域 HKEPC Hardware (https://www.hkepc.com/forum/) Powered by Discuz! 7.2