作者: rocco2005 時間: 2017-5-27 22:41 標題: 屋企幾個同牌子nas FTP問題
本帖最後由 rocco2005 於 2017-5-27 23:59 編輯
我屋企有多過一部Q記既nas
除左default 21
FTP有咩port可以出倒街？
試左50000以上既唔得
岩岩再試多試，20001出面入唔倒黎
作者: 9658@transperth 時間: 2017-5-27 23:22
internal network基本上唔駛理
除非你放街先至要搞
作者: rocco2005 時間: 2017-5-27 23:32
回覆 2# 9658@transperth
如果幾個FTP都想出街可以點搞？
作者: skywolf08 時間: 2017-5-27 23:38
you can customize your ftp port out in each nas.
You may needed to port forward different ip port to different nas.
E.g.
192.168.1.15 port: 20001 Nas1
192.168.1.16 port: 20002 Nas2
192.168.1.17 port: 20003 Nas3
Just read your router and nas manual
作者: rocco2005 時間: 2017-5-27 23:48
本帖最後由 rocco2005 於 2017-5-27 23:59 編輯
you can customize your ftp port out in each nas.
You may needed to port forward different ip port to ...
skywolf08 發表於 2017-5-27 23:38
i tried 50000 onward and nothing works
20001 does not work
作者: rocco2005 時間: 2017-5-28 00:00
回覆 4# skywolf08
i did port forward the necessary port, 20001 does not work
作者: skywolf08 時間: 2017-5-28 00:26
Just try: Even home internet have "open port"
you can try from 1-65535
作者: 9658@transperth 時間: 2017-5-28 03:51
我係咁做法
係router轉port過返去
A NAS port 21->8021
B NAS port 21->8022
C NAS port 21->8023
作者: skywolf08 時間: 2017-5-28 13:08
Some home router does not have those functions.
For NAS side, you needed to made sure your account(s) have FTP service enable and set your port: (e.g 777; any)
For Router. go to port forward/trigger.
NAS FTP: local ip: 192.168.1.50, TCP/UDP, port: 777(as example.)