標題: DS916+ 2G RAM VM 可以嗎? [打印本頁]

---

作者: niceiceman    時間: 2018-1-9 15:56     標題: DS916+ 2G RAM VM 可以嗎?

呢兩日在試DS916+ 2G RAM  的VM , 發現system 只能allocate 512mb RAM 去個VM, 但VM個setting, 又只能assign 1 Vcore  (1/2 CPU CORE) 及128mb RAM....


結果根本run 唔到VM , 大家試過嗎?

已經試左D lightweight OS, 如   SLAX... 但慢到離奇.... 其他的linux 系統, 基本上連install 都失敗...

---

作者: hkce    時間: 2018-1-9 16:14

都試過用不在官方supported model 上裝VMM，最後都出現類似問題。

最好就用官方指定model 及要有4GB RAM以上
https://www.synology.com/en-global/dsm/packages/Virtualization
https://www.synology.com/en-us/k ... irtualization/hosts

---

作者: niceiceman    時間: 2018-1-9 16:48

Nice and clear! Thank you !

++++++++++++++++++++++++++++++++++++++++++


The requirements for virtualization hosts are as follows:
The host must be a supported model with 4 GB or more RAM to run virtual machines; otherwise, it can only provide storage resources for its virtual machines.
The hosts should be in the same subnet.
The interface for the virtualization cluster communication must have a static IP address.
Hosts with VLAN or bridged network interfaces are not supported.
If the hosts are already in another cluster, you have to import these hosts instead of adding them.
It is recommended that two interfaces used for the virtualization cluster communication and virtual machine network be independent.