作者: TH30 時間: 2020-7-20 22:34 標題: 2004安裝失敗loop死求解
有部舊DELL NB
4GB RAM 120GB SSD
2004更新100%成功下載之後開始安裝更新
10-15分鐘就輕機
畫面定格鐘唔行kb冇反應
強制關機再開
就loop 100%下載>安裝輕機
除左按暫停更新（好似最多35日）仲有冇方法？
作者: clio 時間: 2020-7-21 02:38
I don't know if this will solve your problem, but I have similar-looking problem few years back...
try disable "TRIM"...
Command Prompt (Admin) -> fsutil behavior set DisableDeleteNotify 1
Explaination: During Win10 installation, it deletes some file and will send the "TRIM" command to the SSD. If your SSD somehow cannot handle the TRIM command, the installation just halts there without any response, doesn't reboot, dots doesn't twirl.
When installing, Factory image get installed and may override above to enable again. Therefore, until installation completes successfully (or completely failed and rolled back), everytime it auto-reboot, you may need to use (Shift-F10) to get a command prompt, and re-apply above command to ensure TRIM stays off.
See this for more related commands:
https://www.windowscentral.com/h ... eed-ssd-performance
作者: toylet 時間: 2020-7-21 02:56
提示: 作者被禁止或刪除 內容自動屏蔽
作者: chue 時間: 2020-7-21 03:12
換 SSD
作者: 七彩小生 時間: 2020-7-21 06:21
2004 評語不佳，如果不是自動裝，唔好手痕。
作者: 天宮葉月 時間: 2020-7-21 13:20
我經驗手動ISO安裝成功率大啲
via HKEPC Reader for Android
作者: hhmmss2016 時間: 2020-7-21 14:41
2004 係唔係邪邪地. 之前 1909 1903 都上到
但今次一部行 Chipset G31 + ata hdd 上到, 反而新部行 i3+ssd 就 hold 死係 download. (100% 好耐都無郁...)
作者: TH30 時間: 2020-7-21 22:26
換 SSD
chue 發表於 2020-7-21 03:12 AM
換 SSD有幫助嗎？又不是壞碟
作者: chue 時間: 2020-7-21 23:11
當比個籍口自己
